Hey folks,
I'm trying to follow a guide for a Belgian Triple and I don't understand what is meant by this in the instructions "Drain & recirculate until runnings are clear."
Does that mean drain the mashtun, then put it back into the mashtun like you would sparge water and stop the outward flow when the wort runs clear? Or something else?
Cheers
Phily
just get a measuring jug and let the wort flow from your mash tun into it.
Then pour it back into the mash tun gently so as not to disturb the grain bed.
repeat until there are no more bits of grain coming through.
Google 'vorlauf'
Ah, I was over thinking it. So the normal way to create a gain bed filter, unsure why that would be in the directions but on I go! O0
Lay some tin foil over top of grain bed and make holes in it with pen so you don't disturb the grain with the jug of recirculating wort as this will disturb the grain and you don't want that as it's filtering the wort. If you disturb the grain more particles will get to bottom so you back to square one
Quote from: B.B. on February 27, 2016, 02:09:07 PM
Lay some tin foil over top of grain bed and make holes in it with pen so you don't disturb the grain with the jug of recirculating wort as this will disturb the grain and you don't want that as it's filtering the wort. If you disturb the grain more particles will get to bottom so you back to square one
Nice tip
Quote from: auralabuse on February 27, 2016, 02:16:40 PM
Quote from: B.B. on February 27, 2016, 02:09:07 PM
Lay some tin foil over top of grain bed and make holes in it with pen so you don't disturb the grain with the jug of recirculating wort as this will disturb the grain and you don't want that as it's filtering the wort. If you disturb the grain more particles will get to bottom so you back to square one
Nice tip
+1 So simple, but so good!