Hello.
I am stuck with proper connection to my butane gas cylinder. The one which came with the cylinder has some sort of outdoor fitment , without regulator. I am trying to setup a gas cooker which could be safe to be used indoor/ outdoor. Does one of you had experience and could share his opinion how to make this connection and do not blow up the apartment? (https://uploads.tapatalk-cdn.com/20200417/60218ae5213f3123f806deb89dc0e74c.jpg)
Sent from my SM-N950F using Tapatalk
(https://uploads.tapatalk-cdn.com/20200417/55f47823eea07c775c5734394ac73a02.jpg)(https://uploads.tapatalk-cdn.com/20200417/546680bc0475cd8a34faeaade37c70c3.jpg)[IMG]https://uploads.tapatalk-cdn.com/20200417
The grey regulator is for butane. The red one is for propane. Two different gasses, different pressure, different connectors, different regulator.
Sent from my iPad using Tapatalk Pro
Quote from: Cambrinus on April 18, 2020, 01:46:14 PMThe grey regulator is for butane. The red one is for propane. Two different gasses, different pressure, different connectors, different regulator.
Sent from my iPad using Tapatalk Pro
My first thought was that grey cap is just a connector, not pressure regulator. If so then it's great as my canister is filled with butane. Thank you Cambrinus
Sent from my SM-N950F using Tapatalk
You just 'Clip' the grey regulator straight onto the canister.
Pull in the black ring while pushing down onto the canister.
Let go of the black ring while pushing down. The black ring click into place.
Verzonden vanaf mijn iPhone met Tapatalk Pro
All worked without problem ! Thank you for your advice
Sent from my SM-N950F using Tapatalk