• Welcome to National Homebrew Club Ireland. Please login or sign up.
March 28, 2024, 01:08:44 PM

News:

Want to Join up ? Simply follow the instructions here
Not a forum user? Now you can join the discussion on Discord


Help with Mixed Gas Regulator

Started by DoWn2DiE, November 14, 2012, 11:13:15 PM

Previous topic - Next topic

DoWn2DiE

November 14, 2012, 11:13:15 PM Last Edit: November 14, 2012, 11:58:29 PM by Down2die
Ok long story short I have a 50/50 mixed gas tank 200bar here female thread. and want to get a corny setup operational. I Bought this regulator today which fits the tank, its argon/co2 regulator 300 bar.

http://ecx.images-amazon.com/images/I/61GzNoubtNL._AA1500_.jpg

I have a co2 regulator aswell. is it just a matter of swapping the clocks? as the pressure out is in litre/min flow.

this is the co2 one.

http://www.mybeerandwine.ie/images/co2_regulator_with_shutoff.JPG

Appreciate help here as I am unsure.
Thanks

Ale Man

Yes, no problem to do this, I have done it before, I just bought the gauge in Radionics (0-1.5 Bar)

Will_D

QuoteYes, no problem to do this, I have done it before, I just bought the gauge in Radionics (0-1.5 Bar)

See my last post on this thread. As in why bother?

http://www.beoir.org/community/viewtopic.php?f=29&t=8901

Will
Remember: The Nationals are just round the corner - time to get brewing

Ale Man

Christ, I miss read the post in my rush, I thought it was the other way round,
IGNORE LAST TRANSMISSION BY ME

I thought you were using a mixed gas reg on CO2 bottle
Good man Will  ;)

DoWn2DiE

November 15, 2012, 11:48:30 AM #4 Last Edit: November 15, 2012, 11:59:34 AM by Down2die
Appreciate that will.
did you have trouble removing your clocks Aleman? mine seem to be liquid pfte on the screw from the factory and tight as a nuns arse even if I wanted to remove them.

Ale Man

yes, I think it was a 14mm spanner, everything on a reg is super tight and sealed