Kegerators Pics

[Leann ull]

Can't believe your Missus let you drill cabinet for a tap

[RTT]

Ah I find that sending her shopping in Kildare Village, with a few bob, tends to make her forget about holes in cabinets! 

[Leann ull]

Be careful, I have been informed after an unannouced inspection of my boot, Gucci just opened a shop there, "this old thing I've had that for years"

[molc]

Here's mine, fresh off the build Got a larder fridge as a present for Chistmas. It can fit 8 kegs if you push it - I have 5 in there right now- might move the co2 out and have 6. Taps are a little off center, as I'm leaving room for a stout tap on nitro in the future.

The hard beer line is a pain as it can keep the door open - probably need to get shorter shanks and some 90 Degree JG fittings.

[Leann ull]

Drip tray on the wish list?

[molc]

Yeah ordering from aliexpress tomorrow

Currently my drip tray is a towel on the floor.

[Pheeel]

My Keezer, including festive pictures my kids added 

[auralabuse]

Very nice job

[Acott]

Here's mine, it sure isn't pretty but it does the job and was worth every penny 

[Jonnycheech]

Here's mine, fresh off the build Got a larder fridge as a present for Chistmas. It can fit 8 kegs if you push it - I have 5 in there right now- might move the co2 out and have 6. Taps are a little off center, as I'm leaving room for a stout tap on nitro in the future.

The hard beer line is a pain as it can keep the door open - probably need to get shorter shanks and some 90 Degree JG fittings.

Nice! Where did you pick up the JGs that screw onto the back of the shank?

Also did you need to reinforce the shelves or brackets in the fridge with all that weight?

[Jonnycheech]

My Keezer, including festive pictures my kids added 

Hats off sir...that is a thing of real beauty!

[Pheeel]

Hats off sir...that is a thing of real beauty!

Thanks! I need to write it up and send it out...

[molc]

Nice! Where did you pick up the JGs that screw onto the back of the shank?

Also did you need to reinforce the shelves or brackets in the fridge with all that weight?
[/quote]
Www.cateringparts.ie

I made shelves from 1/2" plywood and used the existing plastic brackets that are there. Shelves are quite strong, though might be an idea to make some legs for them...

[Jonnycheech]

Www.cateringparts.ie

I made shelves from 1/2" plywood and used the existing plastic brackets that are there. Shelves are quite strong, though might be an idea to make some legs for them...
[/quote]

Cheers! Do you know what they're called by any chance?