• Welcome to National Homebrew Club Ireland. Please login or sign up.
December 10, 2024, 11:36:25 AM

News:

Renewing ? Its fast and easy - just pay here
Not a forum user? Now you can join the discussion on Discord


How to Kit Brew (a beginner's guide)

Started by LordEoin, January 13, 2013, 11:43:42 PM

Previous topic - Next topic

LordEoin

January 13, 2013, 11:43:42 PM Last Edit: June 26, 2015, 10:57:04 PM by LordEoin
WHY NOT JUST DO WHAT THE INSTRUCTIONS TELL ME?
The instructions in the kit are very good, and should be read (repeatedly), but they miss out on a few bits and pieces that will leave you scratching your head.
Also, most parts about temperatures and gravities are a bit misleading.

VERY IMPORTANT
- Make sure that everything is clean and sanitised all the way through. If you want a cheap sanitizer use 20L water + 30ml thin bleach + 30 ml cheap vinegar. This will make an excellent no-rinse sanitizer that only needs about 30 seconds contact time on clean materials.
- You must be able to keep your fermenting brew fermenting at somewhere around the right temperature for the yeast
- Patience is a virtue, don't poke at your brew unless you need to.
- KISS. Keep It Simple Stupid. Get a couple of brews done to get the feel of it before experimenting with ingredients like grains and hops. It's better to make a plain but good first beer than to mess up a complicated beer.
- Relax! You'll see some weird activity in the fermenter, it's probably fine(provided you've sorted the last 4 points)

  • Sterilize everything. This is very important.
  • Fill and boil a kettle of water (I'll say this a lot, get into the habit)
  • Assemble Fermentation Vessel (FV) and tap if you have one(ensure it is 'off'). This FV does not have a tap, but I will add one later. If you have not yet bought your FV, I recommend that you pay the extra fiver and get one with a tap. It will make gravity readings and bottling so much simpler. But otherwise a syphon tube is also great.

  • Weigh ingredients. For more about fermentable ingredients, click here
  • Warm the kit can in a saucepan of warm water. If you're using Liquid Malt Extract (LME)[/url] warm this also. This will make it runnier and easier to pour. Make sure to take the pack of yeast out first or you'll kill it! Removing the label will ensure that no bits of paper fall into the brew later on.

  • Place the FV on the floor and add the dry fermentables (malt/sugar)
  • Add 2 liters of water off the boil
  • Fill and boil a kettle of water
  • Pick up the FV and swirl, alternating direction occasionally until all the malt is disolved completely. You can stir this in, but you're more likely to get clumps of malt, upset gravity readings, and a broken heart.

  • Put your FV back on the table
  • Open kit can (upside down or the tin opener probably will not grip it) and pour the warm softened goop into the FV. If using LME, add this now too.

  • Fill the can with water off the boil, stir and add the rest of the goop. The boiling water will help to dissolve the remaining goop, but be careful as the can is thin so you need a towel or oven glove to pick it up or experience all the burning fires of hell via your fingertips.
  • Fill and boil the kettle again
  • Stir (or swirl) the liquid thoroughly. Take your time on this step and make sure to get everything dissolved well, otherwise you might have some undissolved fermentables sitting around in clumps, upsetting your gravity reading in a while. It will also help to aerate the wort.
  • Fill with cold water to 19 or 20 liters. Some folks like to mark the FV at 2L, 20L and 23L as a handy reminder.
  • Check the temperature and add hot/cold water to get it to the final volume (usually 23 liters) to about 22C. In this picture, you can see that the temperature is a bit low, so I added warmer water for the last few liters.

  • Stir it vigorously to aerate the wort more. This helps the yeast to be happy litttle critters.
  • Take a gravity reading and write it down. Mine was 1.040. For later gravity readings, you'll need to de-gas them by giving them a shake, leaving them a while, or pouring from glass to glass. Then give the hydrometer a spin in case of any bubbles. But at the moment it's just sweet hoppy water, so a quick spin is fine.

  • Pitch the yeast - Sprinkle it on evenly, stir it in if it makes you feel better. For best results, rehydrate it in 10 times its weight of water (about 100ml) for about 15 minutes before mixing it in. A brief guide to kit yeast can be found here. Don't forget to sterilize your scissors before using it to open the sachet

  • Put the lid on the FV and bring it to its resting place.
  • Add the airlock afterwards, or once you pick up the FV it will suck all the airlock water in.
  • Add your temperature control. If using a heatbelt, you can move it up the FV to produce less heat in the wort, or down to produce more. If you do not have any temperature control, make sure that you leave the FV somewhere with a CONSTANT temperature around 12-14 for lager, 18-20 for ale. More info here.

  • Have a beer!
  • Clean up, or face the wrath of SWMBO...


  • After 24-48 hours it should start bubbling and a thick head of foam (krausen) will form. Every krausen is different, don't worry if yours does not look the same.

  • Now that your yeast has started to work, set your Fermenting Temperature
  • Over the next few days, a layer of sediment (trub) will start forming on the bottom. This is normal.
  • After about a week (maybe more, maybe less) the bubbling will slow and stop. The krausen will die down, leaving a 'krausen ring' of gunk on the wall of the FV. Don't mix this back in. It is bitter waste.
  • Take a gravity reading, then another 2 days later.
  • If they are the same, and within the expected Final Gravity range (usually somewhere between 1.008 to 1.014), then you're good to bottle. Don't worry if it is still cloudy, the beer will clear up fine in the bottle.
  • Before bottling, prime with sugar for carbonation. You can either:
  • Prime the bottles individually with loose sugar or carbonation drops, or bulk prime
  • - loose sugar is cheap but the beer can froth up when it hits it. It's also hard to get uniform carbonation.
  • - carb drops are like boiled sugar sweets, 3 grams each. 1 per 500 ml for less fizzy, 1.5 for quite fizzy
  • - bulk priming is racking the beer into another container containing the priming sugar (leaving the trub behind). Handy if you have varying bottle sizes.
  • Cap the bottles, and put them somewhere warm (around 18C)

  • Leave for a minimum of 2 weeks before drinking, at this stage it should be carbonated but once poured it won't hold its head or carbonation very well. Generally the more time you leave it, the better. My favorite time is usually about 3 months. Shorter for some lighter beers, longer for other darker/stronger beers.
  • There'll be a little sediment at the bottom of the bottle, but you can leave it there by pouring smoothly and slowly.



    WHERE ELSE CAN I FIND GOOD KIT BREWING BEGINNERS' GUIDES?
  • A nice little guide on HomeBrewWest: here
  • The HomeBrew Company also have a good guide here. What it lacks in simplicity it adds in useful detail.
  • Garry's Brewer's Choice Premium Lager thread: here
  • Homebrewing Using Coopers Kits Videos 1 : 2 : 3 : 4.

    GREAT, BUT CAN I ADD MY OWN STUFF INTO THE MIX?
    Of course you can. Add whatever you like. Just remember that you'll have 40 pints of the stuff to drink later on..  ;D
    A guide for KIT-"HACKING" can be found  here Written by a reliable source...

Ciderhead

January 14, 2013, 11:42:53 AM #1 Last Edit: January 14, 2013, 12:08:29 PM by Ciderhead
thats crackin work.

A couple of points

not sure about using J-Cloths for hops I'd stick to just muslin or stainless tea balls
Also when to dry hop, usually in secondary or if you don't secondary, when primary had died down? I would suggest min 7 days.
If you put them in active primary you lose aroma as it is "gassed off" or "scrubbed" with the escaping CO2 formed during fermentation.
http://beersmith.com/blog/2008/05/21/dry-hopping-enhanced-hops-aroma/

Other point is you move the heat belt up the bucket it puts less heat into the wort, move it down it put more in. 

Weiss

I always take the label off the tins before heating them up. Less chance of any bits of paper getting stuck in the ingredients/ME on the way out of the tins when pouring them into the fermentor.  :)
"The world is my lobster"-Keith O'Neill.

Ciderhead

saw a great tip from american kit brewer on youtube where he puts his sterilised paddle  across the bucket and balances the opened can allowing the last drop of viscous contents to drain into brew bucket, you could of course just slosh it with hot water either.

LordEoin

January 14, 2013, 05:40:50 PM #4 Last Edit: February 01, 2019, 11:23:46 AM by LordEoin
Thanks folks, I've updated it now :)

j cloths removed - it works, but it's probably a bad habit
label removing added
heatbelt tips added.

I left out the bit about gassing off and scrubbing though because i want to keep it as simple as possible and apparently in a 23L brew the effects are minimal.
i wasn't going to add anything about grains or dry hopping, but decided to put in a 'taster' to show how easy it can be

Ciderhead

January 14, 2013, 06:30:13 PM #5 Last Edit: January 14, 2013, 07:21:26 PM by Ciderhead
Quote
I left out the bit about gassing off and scrubbing though because i want to keep it as simple as possible and apparently in a 23L brew the effects are minimal.
.

Not true I'm afraid you lose more than 50 percent of precious hop contribution by putting in during active fermentation, addition early in primary is the exception rather than the norm considering you  add them in for aroma and flavour, by putting in early in primary you are just burning these up the chimney.  Personally I think dry hopping is for number 3 or 4 kit when you have the basics under your belt.

I would ask Will our resident chemist to input here as I know his starter for 10 is hops oils and aroma.

There is also another reason they are added towards the end of the fermentation in that the alcohol kills off some of nasties in your hops as they are not sanitised. For virgin kit brewers one of the biggest reasons for off flavours is poor sanitation, I wouldn't be increasing chances of this for first time brewers.

Blueshed

i marked my FV on the 2LT - 20LT - 23LT with a black marker just as a little reminder.

LordEoin

Tub - sure thing, I'll be writing them anyway  ;)

Blueshed - added that handy tip, cheers  :)

Ciderhead - This is from coopers "Technical Development Manager, Brewing Products".
"It doesn't make a lot of difference at what stage, during ferment, the dry hop addition is made. It's really more a matter of adding when convenient.
The notion of CO2 gas scrubbing out hop aroma during fermentation doesn't really apply to tiny wort volumes such as 23litres."
The stuff this man doesn't know about homebrew could be engraved on a grain of rice.  ;D

Personally, I prefer to stick them in at the start so that once the FV is sealed it stays sealed until the brew is moving to another vessel or bottle. Infection from hops is unlikely once the bag is clean.
But for argument's sake I'll change to a bit later as that's the way most folks like to do it.  ;)

LordEoin

January 15, 2013, 01:22:12 AM #8 Last Edit: January 15, 2013, 01:23:03 AM by eoinlayton@hotmail
There, finishing hop teabags are a happy medium.
They might be a bit small to be very effective, but they're definitely easy enough to pop your hop cherry on the first brew  :)
(and it saves a heated debate on dry hopping for another day)

Ciderhead

January 15, 2013, 01:26:46 AM #9 Last Edit: January 15, 2013, 01:27:48 AM by Ciderhead
Quote
Ciderhead - This is from coopers "Technical Development Manager, Brewing Products".
"It doesn't make a lot of difference at what stage, during ferment, the dry hop addition is made. It's really more a matter of adding when convenient.
The notion of CO2 gas scrubbing out hop aroma during fermentation doesn't really apply to tiny wort volumes such as 23litres."
The stuff this man doesn't know about homebrew could be engraved on a grain of rice.  ;D

Personally, I prefer to stick them in at the start so that once the FV is sealed it stays sealed until the brew is moving to another vessel or bottle. Infection from hops is unlikely once the bag is clean.
But for argument's sake I'll change to a bit later as that's the way most folks like to do it.  ;)

I don't want to get into one with you about it as I started researching myself as well.
I was a big believer of the simple advice given by the guys from Coopers until i read this guys comments and I have pm'd him for a response.
Just to be clear forgetting about what you lose in aroma and hop oils as they bind to the yeast and fall to the bottom.
Your muslin in sanitised, your hops are not.
Hops are a natural antiseptic but bacteria can take hold at the start of fermentation before alcohol is present this has the potential to ruin your first beer.
Absolutely secondary has the potential for infection and is not a prerequisite for fermenting particularly for stronger ales or stouts but for lighter delicate beers that don't mask potential off flavours or have long conditioning periods like lagers its best advised to otherwise you run the risk of flavours from trub.
For somebody who was doing their very first kit I wouldn't even mention secondary hopping, as I've said before thats for kit number 3 or 4 when they have honed their technique.

LordEoin

January 15, 2013, 01:47:38 AM #10 Last Edit: January 15, 2013, 02:48:23 AM by eoinlayton@hotmail
Each to their own.
I've already updated it to 'add a hop teabag' a one armed blind monkey could do that.

PS, Tub - Could we remove it from the front page for now until it's finished and polished?

Ciderhead

QuoteEach to their own.
I've already updated it to 'add a hop teabag' a one armed blind monkey could do that.


LordEoin


Ciderhead

January 15, 2013, 02:51:51 AM #13 Last Edit: January 15, 2013, 03:06:11 AM by Ciderhead

DEMPSEY

Dei miscendarum discipulus
Forgive us our Hangovers as we forgive those who hangover against us