National Homebrew Club Ireland

Brewing Discussions => Equipment & Chemicals => Topic started by: Emot on July 09, 2015, 05:17:39 PM

Title: Desperately need a John Guest fitting
Post by: Emot on July 09, 2015, 05:17:39 PM
I've searched far and wide for a John Guest fitting for a cornie disconnect out and after 2 failed ebay attempts of receiving the wrong fitting, I just want to buy one from a human that can give me the right one.

I've found the JG I need on mybeerandwine, but their website doesn't work and they won't reply to email orders.

Please can someone either sell me one or give me a loan of one? I'm based in Dublin but will happily travel  :)

Thanks

Edit: I'll pay over the odds, I just want to be able to keg my beer knowing that my setup is air right.

Edit: I have a brand new STC1000 that I would swap for the JG
Title: Re: Desperately need a John Guest fitting
Post by: cronan on July 09, 2015, 07:57:29 PM
In a similar boat myself only seen them on mybeerandwine but heir site doesn't work and they don't answer the phone.
Title: Re: Desperately need a John Guest fitting
Post by: Greg2013 on July 09, 2015, 08:04:32 PM
Quote from: Emot on July 09, 2015, 05:17:39 PM
I've searched far and wide for a John Guest fitting for a cornie disconnect out and after 2 failed ebay attempts of receiving the wrong fitting, I just want to buy one from a human that can give me the right one.

I've found the JG I need on mybeerandwine, but their website doesn't work and they won't reply to email orders.

Please can someone either sell me one or give me a loan of one? I'm based in Dublin but will happily travel  :)

Thanks

Edit: I'll pay over the odds, I just want to be able to keg my beer knowing that my setup is air right.

Edit: I have a brand new STC1000 that I would swap for the JG

Is it just the beer out JG you need ? For a ball lock corny i assume ? ;D If so let me know ;D
Title: Re: Desperately need a John Guest fitting
Post by: Emot on July 10, 2015, 01:43:37 PM
Quote from: Greg2013 on July 09, 2015, 08:04:32 PM
Is it just the beer out JG you need ? For a ball lock corny i assume ? ;D If so let me know ;D
That's the one. I managed to sort out the crisis by getting a barbed attachment so hooked up my beer line to that with a clip and it's working great. I would still like a JG though just because they are so handy.

Another lad on this site, dcalnan, recommended ABC Spare Parts based in Dublin and he even gave me the link
http://www.cateringparts.ie/Products/STRAIGHT-FITTING-JG-PI4512F4S__3349192.aspx

cronan you might find that helpful also.
Title: Re: Desperately need a John Guest fitting
Post by: CARA on July 14, 2015, 08:39:33 AM
I'd swap one for an STC :D