As per the title
I'm looking for 2 1/2" to 3/8" compression fittings to weld to hlt.. Anybody know where I can get in ireland...
Cheers
The only real supplier of stainless plumbing fittings is BSS on the South Circular Road near Cork St
Maybe
https://www.thehomebrewcompany.ie/stainless-steel-herms-bulkhead-12-male-npt-x-38-compression-p-2961.html
I stand corrected :-)
Quote from: Oh Crap on November 20, 2015, 10:25:29 PM
As per the title
I'm looking for 2 1/2" to 3/8" compression fittings to weld to hlt.. Anybody know where I can get in ireland...
Cheers
Sorry, Don't understand your requiremet:
1/2" to 3/8" compression fittings implies an inline reduction. (As in copper 1/2" to 3/4")
Where/what is the welding requirement?
Also for all SS fittings suggest you contact flowmax.ie on "de sout cide"!
Quote from: nigel_c on November 20, 2015, 10:52:31 PM
Maybe
https://www.thehomebrewcompany.ie/stainless-steel-herms-bulkhead-12-male-npt-x-38-compression-p-2961.html
I looked at them and they are weld less and I was planning on welding them, they would do the job as a last resort also €15 each is pricey imo
Quote from: Will_D on November 20, 2015, 11:26:37 PM
Quote from: Oh Crap on November 20, 2015, 10:25:29 PM
As per the title
I'm looking for 2 1/2" to 3/8" compression fittings to weld to hlt.. Anybody know where I can get in ireland...
Cheers
Sorry, Don't understand your requiremet:
1/2" to 3/8" compression fittings implies an inline reduction. (As in copper 1/2" to 3/4")
Where/what is the welding requirement?
Also for all SS fittings suggest you contact flowmax.ie on "de sout cide"!
I'm using them to repurpose my old ic as a herms coil... It being 3/8" and the cam locks being 1/2" female...
I'll try flowmax..
Cheers😄
Don't bother with flowmax they do not stock them only to order.
Wait aren't compression fittings weldless? Or am I missing something?
Not when they are passing through the wall of the HLT
Quote from: Sorcerers Apprentice on November 23, 2015, 07:08:48 PM
Not when they are passing through the wall of the HLT
http://www.ebay.co.uk/itm/2-5-L-Kettle-Thermowell-Kit-Stainless-Steel-304-homebrew-thermometer/301716341481?_trksid=p2141725.c100338.m3726&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20150313114020%26meid%3D02e16433bfd643679c2d8c4970b646c1%26pid%3D100338%26rk%3D2%26rkt%3D21%26sd%3D301710133789
http://www.ebay.co.uk/itm/Stainless-Steel-homebrew-Weldless-Kettle-Ball-Valve-Kit-1-2-BSP/301717076184?_trksid=p2141725.c100338.m3726&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20150313114020%26meid%3D02e16433bfd643679c2d8c4970b646c1%26pid%3D100338%26rk%3D4%26rkt%3D21%26sd%3D301710133789
I'm a bit confused now, I thought guys were using weldless kits like the above to modify their pots/boil kettles etc. ?
It's for to convert the 1/2" supply from the mash tun to the 3/8" coil of the herms
I've just checked with BSS and they don't carry stainless compression fittings, so it looks like the Homebrew company is your man
Quote from: Sorcerers Apprentice on November 24, 2015, 02:33:57 PM
I've just checked with BSS and they don't carry stainless compression fittings, so it looks like the Homebrew company is your man
I ordered some from China with a couple of other bits..great if they work and cheap enough if they don't 😊 thanks for your efforts I appreciate it