Title: mash tun wanted
Post by: LordEoin on January 20, 2017, 01:31:10 PM
Post by: LordEoin on January 20, 2017, 01:31:10 PM
A friend of mine in Cork is looking for a mash tun.
30-36 liter cooler would be ideal if anyone has one they'd be willing to sell.
30-36 liter cooler would be ideal if anyone has one they'd be willing to sell.
Title: Re: mash tun wanted
Post by: Taf on January 20, 2017, 02:06:51 PM
Post by: Taf on January 20, 2017, 02:06:51 PM
I have one spare, but likely too big, as think it's closer to 60 litres. No problem to borrow if he's stuck.
Title: Re: mash tun wanted
Post by: LordEoin on January 20, 2017, 07:05:09 PM
Post by: LordEoin on January 20, 2017, 07:05:09 PM
yeah, too big I think. but thanks
Title: Re: mash tun wanted
Post by: Keg on January 21, 2017, 04:01:05 PM
Post by: Keg on January 21, 2017, 04:01:05 PM
I have a 45L Igloo mash tun I'd be willing to sell...again that might be too big. Bought it on the forum last January, works perfectly but only got about 4-5 brews before I bought a Bulldog brewer and stopped using it.
Title: Re: mash tun wanted
Post by: LordEoin on January 21, 2017, 07:35:45 PM
Post by: LordEoin on January 21, 2017, 07:35:45 PM
That might do him. How much?
I'll be seeing him on monday.
I'll be seeing him on monday.
Title: Re: mash tun wanted
Post by: Keg on January 21, 2017, 11:50:51 PM
Post by: Keg on January 21, 2017, 11:50:51 PM
I'd sell it for €50.
Paid €60 for it last year and it's barely been used so I reckon that's fair- photos etc here (www.nationalhomebrewclub.ie/forum/for-sale/sold-45l-igloo-mash-tun-60/?)
I'm based in Limerick.
Paid €60 for it last year and it's barely been used so I reckon that's fair- photos etc here (www.nationalhomebrewclub.ie/forum/for-sale/sold-45l-igloo-mash-tun-60/?)
I'm based in Limerick.
Title: Re: mash tun wanted
Post by: Leann ull on January 22, 2017, 12:48:04 AM
Post by: Leann ull on January 22, 2017, 12:48:04 AM
Need to check that link 
Title: Re: mash tun wanted
Post by: Keg on January 22, 2017, 11:54:49 AM
Post by: Keg on January 22, 2017, 11:54:49 AM
Quote from: CH on January 22, 2017, 12:48:04 AMOops, my bad - I tried to shorten the link and failed! Second time lucky
Need to check that link
http://www.nationalhomebrewclub.ie/forum/for-sale/sold-45l-igloo-mash-tun-60/?PHPSESSID=a9b2bad608d9c9bd4a7b811a200a35c7
Title: Re: mash tun wanted
Post by: Leann ull on January 22, 2017, 03:28:56 PM
Post by: Leann ull on January 22, 2017, 03:28:56 PM
I think I'm loosing it as my phone links to this thread about Bells Two Hearted 
(https://uploads.tapatalk-cdn.com/20170122/732d1b3fd051c75c03a1d41fb475193a.jpg)
(https://uploads.tapatalk-cdn.com/20170122/732d1b3fd051c75c03a1d41fb475193a.jpg)
Title: Re: mash tun wanted
Post by: Keg on January 22, 2017, 04:42:38 PM
Post by: Keg on January 22, 2017, 04:42:38 PM
I'm not sure what happened there... Copied and pasted from the browser. I'll try and attach a pic of the Mash Tun later, hopefully doesn't come out as a picture of a pint of Bells Two Hearted!!
Title: Re: mash tun wanted
Post by: Oh Crap on January 22, 2017, 05:12:19 PM
Post by: Oh Crap on January 22, 2017, 05:12:19 PM
I can access the link no problem
Title: Re: mash tun wanted
Post by: LordEoin on January 22, 2017, 08:41:47 PM
Post by: LordEoin on January 22, 2017, 08:41:47 PM
The link works fine for me too.
I think this'll be good.
I'll know tomorrow and let you know :)
I think this'll be good.
I'll know tomorrow and let you know :)
Title: Re: mash tun wanted
Post by: Leann ull on January 22, 2017, 09:05:46 PM
Post by: Leann ull on January 22, 2017, 09:05:46 PM
Sorry it could be a stupid Tapatalk thing :(
Title: Re: mash tun wanted
Post by: krockett on January 22, 2017, 09:42:50 PM
Post by: krockett on January 22, 2017, 09:42:50 PM
If this doesn't go through with Keg - I have a spare 30l mash tun. Am based in Cork.
Its been well used at this stage but works fine.
Let me know if its of interest.
Its been well used at this stage but works fine.
Let me know if its of interest.
Title: Re: mash tun wanted
Post by: mac2k on February 06, 2017, 02:37:00 PM
Post by: mac2k on February 06, 2017, 02:37:00 PM
Hi Keg,
I'm not sure where you are based, but I would be interested in the mash tun, if Eoin's friend does not get back to you.
Kev
I'm not sure where you are based, but I would be interested in the mash tun, if Eoin's friend does not get back to you.
Kev
Title: Re: mash tun wanted
Post by: LordEoin on February 06, 2017, 03:51:29 PM
Post by: LordEoin on February 06, 2017, 03:51:29 PM
Already sold.
Thanks btw Keg, and that citra pale ale hit the spot too :D
Thanks btw Keg, and that citra pale ale hit the spot too :D
Title: Re: mash tun wanted
Post by: Vermelho on February 06, 2017, 06:34:36 PM
Post by: Vermelho on February 06, 2017, 06:34:36 PM
I have a mash tun for sale. With ball valve and top is insulated.One of these:
http://www.omearacamping.com/igloo-ice-cube-48qtz-blue--white--green-stripe-3379-p.asp
Will sell for 55
http://www.omearacamping.com/igloo-ice-cube-48qtz-blue--white--green-stripe-3379-p.asp
Will sell for 55
Title: Re: mash tun wanted
Post by: mac2k on February 07, 2017, 09:04:54 AM
Post by: mac2k on February 07, 2017, 09:04:54 AM
Any Pics?
Title: Re: mash tun wanted
Post by: Kredek on March 01, 2017, 10:54:04 AM
Post by: Kredek on March 01, 2017, 10:54:04 AM
May sombody need :
Mash tun 20 eur : http://www.mybeerandwine.ie/mashing/309-picnic-cooler-35-litre.html (http://www.mybeerandwine.ie/mashing/309-picnic-cooler-35-litre.html)
then you need :
2 flat gasket 2 eur http://www.thehomebrewcompany.ie/12-inch-npt-flat-gasket-p-2972.html (http://www.thehomebrewcompany.ie/12-inch-npt-flat-gasket-p-2972.html)
2 Locknut without Groove 6 eur http://www.thehomebrewcompany.ie/12nps-flange-locknut-without-groove-p-2965.html (http://www.thehomebrewcompany.ie/12nps-flange-locknut-without-groove-p-2965.html)
Stainless Steel Nipple 1/2" NPT x 2" Length 5eur http://www.thehomebrewcompany.ie/stainless-steel-nipple-12-npt-x-2-length-p-2584.html (http://www.thehomebrewcompany.ie/stainless-steel-nipple-12-npt-x-2-length-p-2584.html)
Flexible Tap Connector, (Dia)15mm (Dia)1/2" (L)500mm arround 6 eur http://www.diy.com/departments/flexible-tap-connector-dia15mm-dia1/2-l500mm/56966_BQ.prd (http://www.diy.com/departments/flexible-tap-connector-dia15mm-dia1/2-l500mm/56966_BQ.prd)
To make usefull flexi tap conector You have to cut 1 one end (male).take the needle and make a small hole at the other end so that they cram in a rubber tube that is in the middle of braids. You have to do around the braid. Then take pliers and begin to pull the rubber hose at the cut end. Then fold and squeeze the cut end.
this 10 - 15 min job. On the end should be looks like that :
https://goo.gl/photos/S1uhBcB8BuGTUZ8Z7 (https://goo.gl/photos/S1uhBcB8BuGTUZ8Z7)
Then you need cheapest 1/2 inch ball valve you buy at B & Q Woddies or homebase cost arround 4 - 5 eur.
Plumber's Tape to protect against leakage cost 0,5 - 1 eur
May you need 1/2" NPT to 3/8" Barbed - Stainless http://www.mybeerandwine.ie/accessories/69-12-npt-to-38-barbed-stainless.html (http://www.mybeerandwine.ie/accessories/69-12-npt-to-38-barbed-stainless.html) to connect silicone tube but this is optional.
and all put together
total cost it will be arround 45 eur.
Mash tun 20 eur : http://www.mybeerandwine.ie/mashing/309-picnic-cooler-35-litre.html (http://www.mybeerandwine.ie/mashing/309-picnic-cooler-35-litre.html)
then you need :
2 flat gasket 2 eur http://www.thehomebrewcompany.ie/12-inch-npt-flat-gasket-p-2972.html (http://www.thehomebrewcompany.ie/12-inch-npt-flat-gasket-p-2972.html)
2 Locknut without Groove 6 eur http://www.thehomebrewcompany.ie/12nps-flange-locknut-without-groove-p-2965.html (http://www.thehomebrewcompany.ie/12nps-flange-locknut-without-groove-p-2965.html)
Stainless Steel Nipple 1/2" NPT x 2" Length 5eur http://www.thehomebrewcompany.ie/stainless-steel-nipple-12-npt-x-2-length-p-2584.html (http://www.thehomebrewcompany.ie/stainless-steel-nipple-12-npt-x-2-length-p-2584.html)
Flexible Tap Connector, (Dia)15mm (Dia)1/2" (L)500mm arround 6 eur http://www.diy.com/departments/flexible-tap-connector-dia15mm-dia1/2-l500mm/56966_BQ.prd (http://www.diy.com/departments/flexible-tap-connector-dia15mm-dia1/2-l500mm/56966_BQ.prd)
To make usefull flexi tap conector You have to cut 1 one end (male).take the needle and make a small hole at the other end so that they cram in a rubber tube that is in the middle of braids. You have to do around the braid. Then take pliers and begin to pull the rubber hose at the cut end. Then fold and squeeze the cut end.
this 10 - 15 min job. On the end should be looks like that :
https://goo.gl/photos/S1uhBcB8BuGTUZ8Z7 (https://goo.gl/photos/S1uhBcB8BuGTUZ8Z7)
Then you need cheapest 1/2 inch ball valve you buy at B & Q Woddies or homebase cost arround 4 - 5 eur.
Plumber's Tape to protect against leakage cost 0,5 - 1 eur
May you need 1/2" NPT to 3/8" Barbed - Stainless http://www.mybeerandwine.ie/accessories/69-12-npt-to-38-barbed-stainless.html (http://www.mybeerandwine.ie/accessories/69-12-npt-to-38-barbed-stainless.html) to connect silicone tube but this is optional.
and all put together
total cost it will be arround 45 eur.
Title: Re: mash tun wanted
Post by: Blueshed on March 06, 2017, 07:14:04 PM
Post by: Blueshed on March 06, 2017, 07:14:04 PM
Don't think mybeerandwine.ie trade anymore