Hi there,
I have old 8mm * 12mm copper chiller free to a good home. I have done 30+ plus beers with this but am replacing it with a smaller diameter chiller that will allow me to also fit my hop strainer more easily in to my brewing pot.
Shanna
Forgot to add it's a bit all over the place as I built it with out consideration of the width of the heating elements JK the brew pot & so had to pull some of the coils apart to get it to fit past the elements.
Shanna
A piece of art! :-*
Quote from: LordEoin on October 04, 2017, 03:53:15 PM
A piece of art! :-*
Too kind ;) Originally it was a tight turned copper coil that was formed around a corny keg. That was until I tried to fit it by the two heating elements in my boil pot and figured out it would not fit. I unrolled it a bit and tried to tighten it to reduce the diameter, unsuccessfully I might add. The newer ones I created have a smaller diameters and are almost perfectly round after being formed on a 4" wavin pipe and a 6" diameter fire extinguisher.
Shanna
Revel and chaf has decided to take this off my hands.
Shanna
Hey Shanna,
Did you get rid of this in the end?
Fitz.
Quote from: fitzy on November 06, 2017, 08:01:21 PM
Hey Shanna,
Did you get rid of this in the end?
Fitz.
Not yet but it should be gone tonight, guy collecting it had some transport issues.
Shanna
I presume this found a home by now?
Quote from: Phil.cork on January 25, 2018, 08:18:35 AM
I presume this found a home by now?
No as the person who wanted it previously had vehicle issues and never was able to pick it up. If your interested in it please get me in touch.
Shanna
Also interested could take it off you on Saturday at the bottle sorting.
Sent from my SM-G930F using Tapatalk
Quote from: Shanna on January 28, 2018, 10:17:19 PM
Quote from: Phil.cork on January 25, 2018, 08:18:35 AM
I presume this found a home by now?
No as the person who wanted it previously had vehicle issues and never was able to pick it up. If your interested in it please get me in touch.
Shanna
I would happily take that off your hands.
Sent from my ONEPLUS A5010 using Tapatalk
Quote from: Phil.cork on January 30, 2018, 09:01:43 PM
Quote from: Shanna on January 28, 2018, 10:17:19 PM
Quote from: Phil.cork on January 25, 2018, 08:18:35 AM
I presume this found a home by now?
No as the person who wanted it previously had vehicle issues and never was able to pick it up. If your interested in it please get me in touch.
Shanna
I would happily take that off your hands.
Sent from my ONEPLUS A5010 using Tapatalk
Hi Phil,
Please PM me to arrange collection.
Shanna
Hi, is this still available?
Quote from: Soursean on February 03, 2018, 11:29:26 PM
Hi, is this still available?
Afraid not another member Phil.cork collected it a few weeks back.
Shanna
If anybody looking to get one of these is anyway handy its pretty easy to make them. Search on youtube for how to build an immersion chiller. I used one of these videos to build the first one myself and then made a further two more using variations on them.
Shanna