Text only | Text with Images

National Homebrew Club Ireland

Brewing Discussions => Equipment & Chemicals => Topic started by: Darragh1980 on August 04, 2019, 08:07:08 PM

Title: The nut that screws into the BOC Co2 Suregas bottle
Post by: Darragh1980 on August 04, 2019, 08:07:08 PM
So I got a regulator off Aliexpress and the nut is just slightly too small. I think the nut is 13 tpi and the gad bottle is 14tpi. Do any of you lads knpw where I could find a nut to replace it and can screw into the BOC gas bottle.
I don't know if it is a DIN 477 no.6 or a BS 341 no.8 screw.
Title: Re: The nut that screws into the BOC Co2 Suregas bottle
Post by: CH on August 04, 2019, 09:42:31 PM
Buying cheap regs for the high pressure in boc bottles is never a good idea. Is you reg rated to handle the pressure?
Text only | Text with Images