Got myself a beast of a pump and only have one connector at the moment. I'm presuming looking for all npt wouldn't be easy...
Picture?, is this what your after?
http://www.ebay.ie/itm/1-2-NPT-Male-to-1-2-Bsp-Male-Adaptor-Nipple-for-Air-Water-etc-/121099162925?pt=LH_DefaultDomain_3&hash=item1c3212952d
I need my eyes checked.
Read OP as 'breast pump'
Quote from: johnrm on May 26, 2013, 10:13:33 AM
I need my eyes checked.
Read OP as 'breast pump'
Nothing to do with your eyes
Just out of curiosity what type of pump did you get?
Shanna
Quote from: Rossa on May 26, 2013, 09:27:27 AM
Got myself a beast of a pump and only have one connector at the moment. I'm presuming looking for all npt wouldn't be easy...
Try these guys http://www.bes.co.uk/
This guy? ;D
Quote from: Tube on May 26, 2013, 01:43:50 PM
I had a conversation with a lad in a plumbing place a while back who was very knowledgeable on pipe sizes and tpi (threads per inch) etc.
IIRC, he said 1/2" NPT and 1/2" BSP will fit as they have the same number of tpi, and should be fine if not dealing with high pressure. Here's more info.
http://pipeandhose.com/node/2
Interesting but it will be easier to get BSP fittings over here obviously. I'm working on the idea that once I get the connectors I will be flying with regards to getting the gear.
Quote from: Ciderhead on May 26, 2013, 10:05:04 AM
Picture?, is this what your after?
http://www.ebay.ie/itm/1-2-NPT-Male-to-1-2-Bsp-Male-Adaptor-Nipple-for-Air-Water-etc-/121099162925?pt=LH_DefaultDomain_3&hash=item1c3212952d
I saw those on fleabay alright. Something similar. A female to male adapter is what I am after. I'll make some calls this morning.
Yeah. Cheers 8)
Are you using it for fly sparging? How slow can you drop the flow rate to? Post pics :)
http://www.chuggerpumps.com/product.php?prodid=239 is the pump. I am going to use it to whirlpool. I have a terrible problem with water pressure where I live to this bad boy should help to reduce cooling times significantly. It pumps up to 7 us gallons per minute which is a bit nuts for a hb setup.
Whoa "22.7 LPM", so you are going to throughput nearly an entire brew in 1 minute you wont need any form of aeration anyway, I hope its screwed to the floor ;D
I see this in there too...
"Do not run dry."
Did you source this in the US?
I'm looking at getting a couple of these pumps as well. Did you get stung for duty? If so, how much?
I managed to piggy back on an order put in by a Scottish homebrewer. Shipped it to parcel motel. No duty :-X
http://hopandgrape.co.uk/public/detailv1.asp?itemcode=NEW20265852
Would the blichmann quick connects work for you? Half inch female thread to half inch hose barb?