Print Page - Simple Hopper & Base For Crank And Stein

Title: Simple Hopper & Base For Crank And Stein
Post by: rukkus on March 24, 2013, 08:38:42 PM

I havent done anything with my new mill yet. I dont have a lot of time lately and i'm not the best at building stuff. Does anyone have a how to of the quickest and simplest way of getting these going?

Title: Re: Simple Hopper & Base For Crank And Stein
Post by: DEMPSEY on March 25, 2013, 10:03:12 AM

This is what I made using 10mm plywood,
http://www.nationalhomebrewclub.com/cgi-bin/yabb2/YaBB.pl?num=1358176062

Title: Re: Simple Hopper & Base For Crank And Stein
Post by: wallacebiy on March 28, 2013, 03:04:17 PM

I bought a toy Wheeliebin in Homestore and more and cut a slot in in and Drilled holes for the Crank and Stein
I'll take pics tonight if I can for ye

it's like this though
(https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcS__XeB2sugR4dPrdlFsCBIi8_OzN-qQlDHCB6mkzpmdah39l91bQ)

I just Put two lengths of 2-be-4 on the Bottom of the mill long enough to put the whole thing on top of any Bucket I like to mill into .

( I did get a good friend in the club to weld an Extension onto the mill shaft , so it know fits onto a quickfit Drill )

Does the Job .

Title: Re: Simple Hopper & Base For Crank And Stein
Post by: wallacebiy on March 28, 2013, 07:14:06 PM

(http://i.imgur.com/3fwFT5ml.jpg)

(http://i.imgur.com/WsHjFIJl.jpg)

(http://i.imgur.com/6tZMkTol.jpg)

(http://i.imgur.com/x6fPPaul.jpg)

National Homebrew Club Ireland

Brewing Discussions => Equipment & Chemicals => Topic started by: rukkus on March 24, 2013, 08:38:42 PM