I ordered an STC1000 but got sent a Willhi WH7016C instead. Same thing except the ports are numbered differently & there is no instructions with it & the pdf is throwning up a 404 not found on their website.
Can someone help me with the wiring? What goes where. Id be very grateful. (ive a 100w bulb for heat & the fridge for cool)
(http://i.imgur.com/ORwHpYCl.jpg)
I know port 7 & 8 are for the temp probe. Where do I wire the rest to?
Thanks in advance.
Tom
Willhi will only heat or cool :( not both :(
I use it to heat only my HLT but mine s 30A
STC would have been better :(
can't claim ownership of this artwork :) (One smiley face for balance)
Balls! Thanks for the quick reply.
still useful to have, it will trip off when it gets to temp.
consider something like this so that you beer doesnt go blind in the light ;)
http://www.ebay.co.uk/itm/60W-Electric-Tubular-Heater-1ft-Tube-1-5m-cable-Plug-Top-Wall-Brackets-/140769769352?_trksid=p2047675.m1850&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D11%26meid%3D6707548424304887501%26pid%3D100011%26prg%3D1005%26rk%3D3%26sd%3D170875072092%26
If you ordered an STC 1000 and did not get it,open a case if its from Ebay
Quotestill useful to have, it will trip off when it gets to temp.
consider something like this so that you beer doesnt go blind in the light ;)
http://www.ebay.co.uk/itm/60W-Electric-Tubular-Heater-1ft-Tube-1-5m-cable-Plug-Top-Wall-Brackets-/140769769352?_trksid=p2047675.m1850&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D11%26meid%3D6707548424304887501%26pid%3D100011%26prg%3D1005%26rk%3D3%26sd%3D170875072092%26
Hi ciderhead, l was looking at those tube heaters before on Amazon but wasn't sure if they would get hot enough? How do you find them? I just use a 40w bulb at the moment, I put an old extract can over it to shield the light.
They are designed as heaters and I make sure there is plenty of space around it to circulate air your electric light bulb is not :(
btw, there are aliens in you fridge ;)