As pictured.
2 fully working kegs. Two couplers that fit.
1 keg suitable as fermenter
1 keg with, no coupling.
2 regulators one working, one has broken sight glass.
1 mixed gas bottle
Taps in different states of repair.
2 inline coolers with dual lines.
1 tool to open the standard keg types. It does two types.
I've had these an age and want rid as I'll never keg at this stage.
I used this as a functioning bar at a christening 6 years ago. Essentially the only difference to then is that the lines have been butchered and stuff is showing it's age a bit. Needs a good clean and new lines and you'll get a Working two taps off of it.
I will test the inline chillers if there is interest, they're a bit buried now. I have no reason to believe that they need anymore than a good clean.
300 or nearest offer.
If genuinely interested I'll start digging more out and may even find the coupling for the 4th keg which should be there.
Sent using a complex system of semaphore and ninjas.
If price is considered too high, have a crack, any serious offer considered.
Sent using a complex system of semaphore and ninjas.
I might be interested in this Eoin. Could you check chillers work? I'd be interested in having a look. I'm in lucan.
Ok Mark I'll dig them out and let you know.
Sent using a complex system of semaphore and ninjas.
Both coolers tested and working, plugs just need new fuses.
Sent using a complex system of semaphore and ninjas.
(http://img.tapatalk.com/d/13/09/22/nu4yra3u.jpg)
(http://img.tapatalk.com/d/13/09/22/3u8esequ.jpg)
Sent using a complex system of semaphore and ninjas.
(http://img.tapatalk.com/d/13/09/22/hany4ymu.jpg)
(http://img.tapatalk.com/d/13/09/22/e7utaduq.jpg)
(http://img.tapatalk.com/d/13/09/22/ny8a7a6a.jpg)
(http://img.tapatalk.com/d/13/09/22/ysyvazan.jpg)
Nothing a bit of TLC won't fix.
Sent using a complex system of semaphore and ninjas.
Just thought I'd add, the taps have brackets to attach to the counter, some have a gap for a drip tray.
Sent using a complex system of semaphore and ninjas.
Hey Eoin
Is there any gas in the bottle? Is it 50/50 of 70/30? Are both regs working? Any stout tap? Are kegs steel? Thanks.
Gas is empty, I think it was 70:30 but the label is gone. Kegs are stainless. Maybe one aluminium. One of the taps is a stout tap but will need new seals.
Sent using a complex system of semaphore and ninjas.
Not sure about both regs working, I suspect the only problem is the sight glass on the one, they worked fine the last time they were used. To dispense Guinness and Smithwicks. Basically beyond what I can verify such as working coolers and kegs it's as is. But it worked before and is being sold in good faith. The plan was it would be used by me eventually but I'm over it. There are fobbing taps on the lines too, in case you run two taps at once.
Sent using a complex system of semaphore and ninjas.
(http://s149.photobucket.com/albums/s62/Botswanatrip/?action-view¤t=IMAG0320.jpg)
Sent using a complex system of semaphore and ninjas.
(http://s149.photobucket.com/albums/s62/Botswanatrip/?action-view¤t=IMAG0319.jpg)
Sent using a complex system of semaphore and ninjas.
Keg opening key.
http://s149.photobucket.com/albums/s62/Botswanatrip/?action=view¤t=DSCI0002.jpg
Embedded links don't appear to be working too well from my phone.
Sent using a complex system of semaphore and ninjas.
Might be interested in one of the chillers , what would Ye do it for ?
I potentially have someone interested in the bundle. Let that conversation run its course, and we'll see if a split might happen.
Sent using a complex system of semaphore and ninjas.
Would you take €250 for the lot?
Yeah Mark, I'd let it go for that. I'll send you a PM
Sent using a complex system of semaphore and ninjas.
SOLD pending completion of transaction.
Sent using a complex system of semaphore and ninjas.