(http://img.tapatalk.com/d/13/11/11/mameqa9y.jpg)
I water tested today and KH is very low at 80mg, so I'm not going to acidulate for an ESB cos it's about right. Last two brews the water has been very soft here.
Only water treatment is campden as my calcium test is past working correctly and needs to be replaced. I'll horse some gypsum into the boil.
Recipe added.
TT
GH is 120mg.
I take KH as interchangeable with total alkalinity, so at 80,I'm happy I'm in the ballpark.
Sent from my HTC One
Mashed in at 68c.
Sent from my HTC One
54l @ 1.051 mash temp was very high though, ended up at 71c, due to bad mixing, gonna go grab some tate and lyles golden syrup to make up some more fermentables. I've topped up by 5l preboil to account for losses.
Sent from my HTC One
Sent from my HTC One
I strongly recommend skimming the hot break if you BIAB and care about clarity. With the 2*3kw elements I use. It also helps to stop boil overs although I also have to use an office fan to that end also.
Chiller is running on 55l of 1.055 wort. I tend to brew higher gravity and dilute pre and post boil to make up for losses. This is also cutting too far into water rationing time, but it's still running.....
Sent from my HTC One
And she's off. I possibly underpitched with the slurry of a one gallon starter, Mr malty said I needed to step it once again to 1.5gallons, I had no time so I pitched what I had. It should turn out fine anyway.
Sent from my HTC One
Healthy looking fridge
:-)
Sent from my HTC One
My small satellite brew is at 1.018 this morning. Because of the high mash temps it probably won't drop much more. I'll take a reading again tomorrow. Taste is good, seems I am within style. Alcohol content at this point is 4.9%. The satellite brew is on a different yeast, and it looks like the main brew might still be going.
Sent from my HTC One
I checked the brew and it's stalled at 1.024, so I pitched more yeast, different variety, but also a British ale yeast. Underpitching wasn't a good idea, I hope it takes off again, far too sweet at that rate. The small brew in the 2l bottle with sufficient yeast got down to 1.018, so I drained that and pitched and added another vial. Fingers crossed.
Why did you mash at 68c.
Quote from: DEMPSEY on November 14, 2013, 10:02:32 AM
Why did you mash at 68c.
I was looking for body, unfortunately I didn't mix properly and I was above that. The attenuated sample tastes really good....
Sent from my HTC One
I think I need to rouse it.
Sent from my HTC One
Seems to me you might have more dextrins than you wanted :(
Quote from: DEMPSEY on November 14, 2013, 10:26:19 AM
Seems to me you might have more dextrins than you wanted :(
Well like I said, the small satellite brew attenuated to 1.018, I'd be happy if this one got that far.
Sent from my HTC One
it's down a little since last night, dropped another 2 points since adding the new yeast and it's not as sweet to the taste, so let's hope it keeps on trucking.
Down another few points, another one or two and I'll be happy, it's still tasting a little sweet. I think I'll leave it until Sunday at least and see from there if I leave it until the following weekend or bottle/barrel it or if it needs a little longer.
Sent from my HTC One
Hmmm this has kept on going. Down to 1.010 today.
Sent from my HTC One
Are you sure your first readings and these are real. Odd to see a stuck ferment kick off again when it is in the teens.
Well it was moving down and had hit 10.16,yesterday. I'll monitor and bottle it at the weekend.
Sent from my HTC One
The taste has also been drying out and I roused a number of times. So I think the reading is correct.
Sent from my HTC One