Can anyone put up some pic of their Nitro set up especially those of a Keggerator Nature, it seem you need john guest fitting which i haven't used before so just wondering what bits and pieces i need.
Thanks
Covey
(http://i.imgur.com/j6tdEu3l.jpg)
That reg in the picture isnt the one you are getting off Barry, but they're similar. You'll need some 5/16" beer/gas line for it. You'll also need the JG fitting for your corny gas disconnect or if you dont have a spare gas disconnect you can buy one with the JG fitting on it already. http://www.hopandgrape.co.uk/public/detailv1.asp?itemcode=QUI20173038
Cheers Tom,
Whats the story with that yellow pressure line,that has the male end into the cyclinder, does the reg have a JG fitting for the gas line to the keg
The yellow line is exactly how it looks there. It connects the reg to the gas tank. Yes the reg has a 5/16" gas line coming out of it to a JG 5/16 connector. You then stick another length of 5/16" gas line in there & connect that to your 5/16" fitting on your corny gas disconnect. Its very simple once you see it in front of you.
pint look lovely.......
£30 for one, must see if there ones about