Text only | Text with Images

National Homebrew Club Ireland

Buy & Sell => Wanted => Topic started by: Greg2013 on February 25, 2014, 10:53:37 AM

Title: John Guest Cornelius Keg Fittings.
Post by: Greg2013 on February 25, 2014, 10:53:37 AM
Due to needing to upgrade some small bits and bobs i am looking for the following, JG fitting for gas in disconnect,JG fitting for beer out disconnect,JG fitting for CO2 regulator connect.Also 3/8 JG gas line and 5/16 JG Beer line(i think those are the correct diameters?).I also need some JG splitters for running several kegs off the one CO2 tank.  ;D Hoping to get two more cornie kegs in the next couple of weeks so i will also likely need some actual disconnects for those as well  ;D

I have tried the three amigos here in Ireland but as usual those that do them are out of stock with months  ::)
Title: Re: John Guest Cornelius Keg Fittings.
Post by: Jacob on February 25, 2014, 11:27:10 AM
Did u checked mybeerandwine.ie?  ::)

http://www.mybeerandwine.ie/advanced_search_result.php?keywords=john&Submit.x=0&Submit.y=0&Submit=Search
http://www.mybeerandwine.ie/kegging-systems-disconnects-c-140_141_145.html
http://www.mybeerandwine.ie/advanced_search_result.php?keywords=line&Submit.x=0&Submit.y=0&Submit=Search
Title: Re: John Guest Cornelius Keg Fittings.
Post by: Greg2013 on February 25, 2014, 11:47:19 AM
Quote from: Jacob on February 25, 2014, 11:27:10 AM
Did u checked mybeerandwine.ie?  ::)

http://www.mybeerandwine.ie/advanced_search_result.php?keywords=john&Submit.x=0&Submit.y=0&Submit=Search
http://www.mybeerandwine.ie/kegging-systems-disconnects-c-140_141_145.html
http://www.mybeerandwine.ie/advanced_search_result.php?keywords=line&Submit.x=0&Submit.y=0&Submit=Search

Aaaah no boss  :-[ :-[ :-[
Title: Re: John Guest Cornelius Keg Fittings.
Post by: Ciderhead on February 25, 2014, 12:01:27 PM
I use this guy
http://www.ebay.co.uk/sch/lig5150/m.html?_nkw=&_armrs=1&_ipg=&_from=
Title: Re: John Guest Cornelius Keg Fittings.
Post by: Greg2013 on February 27, 2014, 10:34:25 AM
Quote from: CH on February 25, 2014, 12:01:27 PM
I use this guy
http://www.ebay.co.uk/sch/lig5150/m.html?_nkw=&_armrs=1&_ipg=&_from=

Messaged that guy CH but he only has the JG bit for the regulator and the beer line plus a co2 line splitter,he does not have the pieces that screw on to the disconnects :(
Title: Re: John Guest Cornelius Keg Fittings.
Post by: pob on February 27, 2014, 09:20:20 PM
Or these guys
http://www.hopandgrape.co.uk/public/detailv1.asp?itemcode=QUI20173038


Title: Re: John Guest Cornelius Keg Fittings.
Post by: Jacob on February 28, 2014, 08:59:28 AM
Or MyBeerAndWine again  8)

http://www.mybeerandwine.ie/john-guest-female-adapter-cornelius-quick-disconnect-p-439.html
Title: Re: John Guest Cornelius Keg Fittings.
Post by: Greg2013 on February 28, 2014, 09:31:53 AM
Quote from: Jacob on February 28, 2014, 08:59:28 AM
Or MyBeerAndWine again  8)

http://www.mybeerandwine.ie/john-guest-female-adapter-cornelius-quick-disconnect-p-439.html

Yep mybeerandwine it is, have all the other bits sorted except for the JG fittings for the disconnects so i will get those off MBW, never know i might see something else i like while i am on the site as well  :P
Text only | Text with Images