National Homebrew Club Ireland

Hi lads,
if anyone interested, I've few regulators, taps, cornys and other things to go to good home:

http://www.adverts.ie/2347100

http://www.adverts.ie/2155900

http://www.adverts.ie/2214570

http://www.adverts.ie/2275190

All d best, Alex.

Hi Alex, would be willing to give the regulator (€35) a good home for the asking price!
Let me know if it's a deal when u can. :-?

I have one of his regs and its solid, I took off the barb and screwed in a JG fitting for push fit gas line . Its a solid reg and very happy, I should have bought the double gauge one though! :(
Tube you want the barb still?

hey Alex, have you the double reg back in ?

No probs, IsMise if it's a good home no probs. Will pm you my contacts.
Hi newToBrew, not yet, I'll have em this sat, you're on top of the list.
Ciderhead, I'll swap that single one for double for you, if you want, hope you didn't run 100kg gas through it in the space of last two weeks?

hey - If Ciderhead - or anyone else for tha matter is picking stuff up from you - I might get them to collect my stuff - it may just trickle down to me on the nhc express !!!

QuoteI have one of his regs and its solid, I took off the barb and screwed in a JG fitting for push fit gas line . Its a solid reg and very happy, I should have bought the double gauge one though! :(
Tube you want the barb still?

Hi Cider, iv got a reg of Alex and am due to do my first kegging the dial goes up to 6 psi is it possible to force carb at this pressure  :-? how do you carb with these regs, thank

Quote
Hi Cider, iv got a reg of Alex and am due to do my first kegging the dial goes up to 6 psi is it possible to force carb at this pressure  :-? how do you carb with these regs, thank

Regs go a lot higher than 6 psi!!

Most regs read bar ( 1 bar = 14 psi ) AND psi.

Are you sure you aren't reading the Bar numbers and not the PSI numbers?

Will

Quote

QuoteI have one of his regs and its solid, I took off the barb and screwed in a JG fitting for push fit gas line . Its a solid reg and very happy, I should have bought the double gauge one though! :(
Tube you want the barb still?

Hi Cider, iv got a reg of Alex and am due to do my first kegging the dial goes up to 6 psi is it possible to force carb at this pressure  :-? how do you carb with these regs, thank

The regs are in Bar, it depends what you are trying to carb, if its a lager etc 3 bar and roll around on the floor for half an hour and allow co2 to be absorbed, and you will hear your tank fizz as more c02 goes into your beer.
I never force carb as above just leave it on 7-10 days at your preferred bar/psi rate in the cold(easier to absorb c02 at colder temps)
Dont forget after initial filling to flush out the oxygen in the headspace.
Enough chat follow Craig parts 1 through 4, here is the first one
https://www.youtube.com/watch?v=hbjGjXVXqpw

Quoteroll around on the floor for half an hour

I never force carb as above

:o

Quote

Quoteroll around on the floor for half an hour

I never force carb as above

:o

Wot? the keg not the carber! ;)

Have you now CH, I had visions of you coming in from the shed all sweaty and dusty but with a grin on your face and a perfectly carbed pint in hand  :P

QuoteHave you now CH, I had visions of you coming in from the shed all sweaty and dusty but with a grin on your face and a perfectly carbed pint in hand  :P

I'm usually like that - but with perfectly carbed pints inside me  ;D