What with chuggers and disconnects arriving does any one want any more tubing from Damo?
I have checked with him and he still has plenty!
Will_D: 10 meters of 1/2" (random lengths from 3 down to say 1m long)
3 metres of 3/8" or so
Will_D: 10 meters of 1/2" (random lengths from 3 down to say 1m long)
3 metres of 3/8" or so
Nigel : 5 m of 1/2
Will_D: 10 meters of 1/2" (random lengths from 3 down to say 1m long)
3 metres of 3/8" or so
Nigel : 5 m of 1/2
brenmurph : 3 x 3 metres of 3/8th ( or 9 metres in one piece even better :))
Will_D: 10 meters of 1/2" (random lengths from 3 down to say 1m long)
3 metres of 3/8" or so
Nigel : 5 m of 1/2
brenmurph : 3 x 3 metres of 3/8th ( or 9 metres in one piece even better :))
Shanna: 10 metres of 1/2" (as close as possible to 2 x 5 metres lengths) and 6 metres of 3/8" (2 x 3 metre lengths)
Hiya
Lads, a couple of changes since the original thread!
1) No 3/8th left
2) The paypal option for payment to the NHC a/c is no longer available!
Payment can be made into my paypal a/c.(pm for details)
Shanna, you posted me a link to the original thread. Did you read it? The maximum lengths available are approx. 2.5-2.8m long. ;D
Will, Bren do you need to change your order?
Cheers
Quote from: Damo on June 30, 2014, 08:37:21 PM
Hiya
Lads, a couple of changes since the original thread!
1) No 3/8th left
2) The paypal option for payment to the NHC a/c is no longer available!
Payment can be made into my paypal a/c.(pm for details)
Shanna, you posted me a link to the original thread. Did you read it? The maximum lengths available are approx. 2.5-2.8m long. ;D
Will, Bren do you need to change your order?
Cheers
Sorry Damo did read the thread but memory is not so good so sometimes forget ;) Will update my ask accordingly.
Shanna
Will_D: 10 meters of 1/2" (random lengths from 3 down to say 1m long)
3 metres of 3/8" or so
Nigel : 5 m of 1/2
brenmurph : 3 x 3 metres of 3/8th ( or 9 metres in one piece even better :))
Shanna: 8 metres of 1/2" (as close as possible to 4 x 2 metres lengths)
Damo just to confirm price of 4 x 2 metre lengths is €20.
Shanna
Will_D: 10 meters of 1/2" (random lengths from 3 down to say 1m long)
3 metres of 3/8" or so
Nigel : 5 m of 1/2
brenmurph : 3 x 3 metres of 3/8th ( or 9 metres in one piece even better :))
Shanna: 8 metres of 1/2" (as close as possible to 4 x 2 metres lengths)
Jacob: 4 x 2m of 1/2"
Will_D: 10 meters of 1/2" (random lengths from 3 down to say 1m long)
3 metres of 3/8" or so
Nigel : 5 m of 1/2 (2 x 2.5 if possible)
brenmurph : 3 x 3 metres of 3/8th ( or 9 metres in one piece even better )
Shanna: 8 metres of 1/2" (as close as possible to 4 x 2 metres lengths)
Jacob: 4 x 2m of 1/2"
Will_D: 10 meters of 1/2" (random lengths from 3 down to say 1m long)
Nigel : 5 m of 1/2 (2 x 2.5 if possible)
brenmurph : 3 x 3 metres of 3/8th ( or 9 metres in one piece even better )
Shanna: 8 metres of 1/2" (as close as possible to 4 x 2 metres lengths)
Jacob: 4 x 2m of 1/2"
Sorry for digging this up again but would anyone know the rating of the silicone tubing? R@H said he uses it as gas or beer lines. Is the psi rating for both the same? Just want to check because I'm doing a rebuild on my kegerator hopefully next week.
Quote from: nigel_c on November 14, 2014, 04:53:04 PM
Sorry for digging this up again but would anyone know the rating of the silicone tubing? R@H said he uses it as gas or beer lines. Is the psi rating for both the same? Just want to check because I'm doing a rebuild on my kegerator hopefully next week.
I got the 1/4" ID x 3/8 OD for my beer the ones that I got from Damo is medical tubing class "ADCF".They have some reinforcement in them.I still need to get another 5 meters or so.
The 1/2" tubes are not really pressure rated! and should not be used under any serious pressure!
By that I mean they are Ok for pumping around hot wort at much less than half a bar !
I used some 1/22 silicon once ( slightly thinner wall than Dammos) on the garden tap (say 2 bar) and it ballooned up like a hot water bottle!!
You will be fine in a brewing set up