5 pin lock kegs (1 has slight leak on poppit valve, put is fine if disconnect is attached) €50 each
5 ball lock kegs €50 each
3 sets of pin lock disconnects (in and out) €50 per set
2 sets of ball lock disconnects (in and out) €50 per set
3 line cooler €120
2 line cooler €100
Bass table top tap €50 needs drip tray, slight scratches
Carlsberg tap €35 slight damage to top of handle
Smithwichs tap €40
Guinness tap €35
Bud tap €40
3 line gas regular €100
6 line gas manifold (needs main regular) €80
5kg C02 gas bottle with gas reg €60 (over half full)
9 kg c02 bottle (this was filled and never used) €30
Lads if I've over priced anything, let me know. pictures available on request
Eddie
:o
There's a blast from the past.
3 line cooler, worked the last time I tried it
2 line cooler, water agitator pump not working but cooler works fine
3 line gas reg
fire extinguisher C02 bottle with reg
Gas management board, needs main regulator
Quote from: nigel_c on September 08, 2014, 05:33:16 PM
:o
There's a blast from the past.
Nice to see I'm not forgotten
Any chance you can stick up a pic of the tap handles, in particular the shaft out back of them ? ;D
disconnects and fittings
TAPS
Quote from: Greg2013 on September 08, 2014, 06:37:28 PM
Any chance you can stick up a pic of the tap handles, in particular the shaft out back of them ? ;D
Carlsberg tap is the same tap is the same connection, its attached to my fridge at the minute but is for sale as well
Quote from: eddieken on September 08, 2014, 06:54:03 PM
Quote from: Greg2013 on September 08, 2014, 06:37:28 PM
Any chance you can stick up a pic of the tap handles, in particular the shaft out back of them ? ;D
Carlsberg tap is the same tap is the same connection, its attached to my fridge at the minute but is for sale as well
Many thanks for the pics but the shanks are too short for me, i need a 4 inch shank to get through the collar on my keezer and a bit spare out back for connecting JG. ;D
bass tap
Quote from: Dube on September 08, 2014, 06:57:38 PM
Will take the 3 line cooler please.
I'm in Meath/north Dublin area, but can arrange to meet (within reason).
Quote from: Greg2013 on September 08, 2014, 06:58:53 PM
Quote from: eddieken on September 08, 2014, 06:54:03 PM
Quote from: Greg2013 on September 08, 2014, 06:37:28 PM
Any chance you can stick up a pic of the tap handles, in particular the shaft out back of them ? ;D
Carlsberg tap is the same tap is the same connection, its attached to my fridge at the minute but is for sale as well
Many thanks for the pics but the shanks are too short for me, i need a 4 inch shank to get through the collar on my keezer and a bit spare out back for connecting JG. ;D
Just to be sure?
I'm free most nights this week. I'll Pm you and arrange something
Quote from: eddieken on September 08, 2014, 06:30:37 PM
Gas management board, needs main regulator
I'll offer you €20 for that
Hi Eddie,
5 ball lock cornies for me please, but must see them first.
Quote from: alealex on September 09, 2014, 03:58:31 AM
Hi Eddie,
5 ball lock cornies for me please, but must see them first.
I'll put up a photo this evening of the kegs
Quote5kg C02 gas bottle with gas reg €60 (over half full)
This please. I'm in Dublin 5. I'll be out in Balbriggan and Swords this weekend.
Quote from: groom on September 09, 2014, 12:09:45 PM
Quote5kg C02 gas bottle with gas reg €60 (over half full)
This please. I'm in Dublin 5. I'll be out in Balbriggan and Swords this weekend.
PM me and we'll arrange something
pin lock kegs
Quote from: Will_D on September 09, 2014, 12:01:22 AM
Quote from: eddieken on September 08, 2014, 06:30:37 PM
Gas management board, needs main regulator
I'll offer you €20 for that
€50 is the lowest i'll go on this. It has 5 working outlets, 1 outlet can be set to serving pressure and the other 4 can be set at another pressure, each outlet can be isolated and have john guest fittings.
Quote from: eddieken on September 09, 2014, 06:12:54 PM
pin lock kegs
I actually asked for ball lock cornys.. :-\
Whoops, i'll post that tomorrow evening
No worries, I'll have a look tomorrow eve.
The Ball lock gang
200,00 Euro offered for the ball lock gang, collection before sunday.
Quote from: alealex on September 10, 2014, 06:10:22 PM
200,00 Euro offered for the ball lock gang, collection before sunday.
1 of the ball lock gang has since found a new home. €180 is the lowest I can go on the rest.
Quote from: eddieken on September 08, 2014, 05:24:30 PM
5 pin lock kegs (1 has slight leak on poppit valve, put is fine if disconnect is attached) €50 each
5 4 ball lock kegs €50 each
3 sets of pin lock disconnects (in and out) €50 per set
2 sets of ball lock disconnects (in and out) €50 per set
3 line cooler €120
2 line cooler €100
Bass table top tap €50 needs drip tray, slight scratches
Carlsberg tap €35 slight damage to top of handle
Smithwichs tap €40
Guinness tap €35
Bud tap €40
3 line gas regular €100
6 line gas manifold (needs main regular) €80
5kg C02 gas bottle with gas reg €60 (over half full)
9 kg c02 bottle (this was filled and never used) €30SOLD
Updated list
Eddie
Deal, 180 then for 4. will pm soon.
Next in line for ball locks if this falls through
Quote from: eddieken on September 10, 2014, 07:52:37 PM
Quote from: eddieken on September 08, 2014, 05:24:30 PM
5 pin lock kegs (1 has slight leak on poppit valve, put is fine if disconnect is attached) €50 each
5[/s] 4 ball lock kegs €50 eachsold
3 sets of pin lock disconnects (in and out) €50 per set
2 sets of ball lock disconnects (in and out) €50 per setsold
3 line cooler €120sold
2 line cooler €100
Bass table top tap €50 needs drip tray, slight scratches
Carlsberg tap €35 slight damage to top of handle
Smithwichs tap €40
Guinness tap €35
Bud tap €40
3 line gas regular €100
6 line gas manifold (needs main regular) €80
5kg C02 gas bottle with gas reg €60 (over half full)
9 kg c02 bottle (this was filled and never used) €30SOLD
Updated list
Eddie
Going to keep the rest of equipment for the time being, talking to a few people has put the goo back on me to at least try extract brew in the few while.
You went all out on Beoir a good few years back putting your kit together. What happened? loose interest?
I'd be interested in the Co2 reg if its still around.
Quote from: nigel_c on September 12, 2014, 03:31:09 PM
You went all out on Beoir a good few years back putting your kit together. What happened? loose interest?
I'd be interested in the Co2 reg if its still around.
Yeah, a few family/personnel issues took centre stage and the brewing was put on to back burner. The kit was sitting there feeling all lonely and ignored for the guts of over 2 years, so I thought I'd let it be loved by others.
Keeping what's left as I might give extract a whirl over the next while.
eddie
Hi Eddie, would you still be have a set of pin lock disconnects? Be interested in a set if you do?