National Homebrew Club Ireland

Buy & Sell => Wanted => Topic started by: Greg2013 on October 29, 2014, 02:55:23 AM

Title: Hose Barbed Elbow.
Post by: Greg2013 on October 29, 2014, 02:55:23 AM
Looking for two of these but in stainless steel,any links would be appreciated,best i can find so far is near $30 from the states.  ;D


http://www.ebay.com/itm/Lot-of-5-New-90-Elbow-Brass-Barb-Fitting-1-2-ID-Hose-x-1-2-Male-NPT-Air-/261260700538?pt=Boat_Parts_Accessories_Gear&hash=item3cd459eb7a&vxp=mtr
Title: Re: Hose Barbed Elbow.
Post by: Garry on October 29, 2014, 06:29:07 AM
How about this (http://www.mybeerandwine.ie/accessories/70--12-npt-to-38-barbed-90-degree-elbow-stainless-.html?search_query=elbow&results=4)?
Title: Re: Hose Barbed Elbow.
Post by: Greg2013 on October 29, 2014, 04:45:38 PM
Quote from: Garry on October 29, 2014, 06:29:07 AM
How about this (http://www.mybeerandwine.ie/accessories/70--12-npt-to-38-barbed-90-degree-elbow-stainless-.html?search_query=elbow&results=4)?

Cheers Garry yes i had seen that but i want 1/2 inch both sides if at all possible,however i suppose a jubilee clip would solve that ?  :o
Title: Re: Hose Barbed Elbow.
Post by: Shanna on October 29, 2014, 07:20:20 PM
Quote from: Greg2013 on October 29, 2014, 04:45:38 PM
Quote from: Garry on October 29, 2014, 06:29:07 AM
How about this (http://www.mybeerandwine.ie/accessories/70--12-npt-to-38-barbed-90-degree-elbow-stainless-.html?search_query=elbow&results=4)?

Cheers Garry yes i had seen that but i want 1/2 inch both sides if at all possible,however i suppose a jubilee clip would solve that ?  :o

Combine this

http://www.ebay.com/itm/1-2-Male-thread-Pipe-fitting-x15mm-barb-Hose-Tail-Connector-Stainless-Steel-304-/390865559665?pt=LH_DefaultDomain_0&hash=item5b01672071

and this

http://www.ebay.com/itm/304-Stainless-Steel-1-2-Female-x-1-2-Male-street-Elbow-Pipe-Fitting-threaded-/290943448074?pt=LH_DefaultDomain_0&hash=item43bd94b40a

And ptfe tape to seal them up.

Bought loads of parts from them. Great prices but up to a month for delivery.

Shanna
Title: Re: Hose Barbed Elbow.
Post by: Greg2013 on October 29, 2014, 07:47:20 PM
Quote from: Shanna on October 29, 2014, 07:20:20 PM
Quote from: Greg2013 on October 29, 2014, 04:45:38 PM
Quote from: Garry on October 29, 2014, 06:29:07 AM
How about this (http://www.mybeerandwine.ie/accessories/70--12-npt-to-38-barbed-90-degree-elbow-stainless-.html?search_query=elbow&results=4)?

Cheers Garry yes i had seen that but i want 1/2 inch both sides if at all possible,however i suppose a jubilee clip would solve that ?  :o

Combine this

http://www.ebay.com/itm/1-2-Male-thread-Pipe-fitting-x15mm-barb-Hose-Tail-Connector-Stainless-Steel-304-/390865559665?pt=LH_DefaultDomain_0&hash=item5b01672071

and this

http://www.ebay.com/itm/304-Stainless-Steel-1-2-Female-x-1-2-Male-street-Elbow-Pipe-Fitting-threaded-/290943448074?pt=LH_DefaultDomain_0&hash=item43bd94b40a

And ptfe tape to seal them up.

Bought loads of parts from them. Great prices but up to a month for delivery.

Shanna

That is great Shanna many thanks. ;D