National Homebrew Club Ireland

Brewing Discussions => All Grain Brewing => Topic started by: rje66 on January 20, 2015, 07:46:40 PM

Title: first BIAB attempt
Post by: rje66 on January 20, 2015, 07:46:40 PM
Hi , hope I'm in correct section for this.
Have done kits and a bit of hacking and want to move  to all grain. Have most of the gear, ie keggle, gas set up, fv x2,  have a bag but not sure it's big enough,  and the usual little bits and pieces. Don't have a cooling system yet and have a cool box just about converted.
What other essential bits do I need?.
Am looking for a simple entry level recipe, (if poss something with MO as I have some coming on a group buy, but not essential. Love hoppy IPAs.
Thanks
More questions later!!!
Title: Re: first BIAB attempt
Post by: Pheeel on January 21, 2015, 10:27:00 AM
Quote from: rje66 on January 20, 2015, 07:46:40 PM
Hi , hope I'm in correct section for this.
Have done kits and a bit of hacking and want to move  to all grain. Have most of the gear, ie keggle, gas set up, fv x2,  have a bag but not sure it's big enough,  and the usual little bits and pieces. Don't have a cooling system yet and have a cool box just about converted.
What other essential bits do I need?.
Am looking for a simple entry level recipe, (if poss something with MO as I have some coming on a group buy, but not essential. Love hoppy IPAs.
Thanks
More questions later!!!

I did partial mashes first in a small pot and no need for any cooling (other than dunking in my sink with ice).  Cool box would suggest you're not doing BIAB though...
How big's the Keggle?
How big's the bag?

You could start with a simple pale ale but whatever tickles your fancy
Title: Re: first BIAB attempt
Post by: Roo on January 24, 2015, 10:03:23 AM
If you have £20 or so (€500 the way the exchange rate is going) you could build a wort chiller. I made one by buying some reasonably flexible copper pipe. I coiled it round a paint tin and nicked some gardening hose from the reel in the garage. Attached them to the end of the coil with Q clips and one end I connected a hose connector. Easy. I'll try and post a pic of that would help. It is a bit crude but effective.
Title: Re: first BIAB attempt
Post by: rje66 on January 24, 2015, 07:25:04 PM
Thanks for replies, had seen the diy chiller on YouTube, it's on the list of things to do.seems straightforward enough.

Need to get a proper sized bag though.

Are there specific biab recipes?
Title: Re: first BIAB attempt
Post by: Dunkel on January 24, 2015, 07:32:40 PM
Nope. Any all-grain recipe can be done with BIAB method.  :)
Title: Re: first BIAB attempt
Post by: auralabuse on January 25, 2015, 02:52:40 PM
Did my first biab this week.  I made a very large mess,  lots of mistakes but I have a smashing smelling stout in the fv.  Pitched yeast last night so I'm hoping to see lots of activity when I get home from work later.  Next brew will hopefully have an stc integrated into the process
Title: Re: first BIAB attempt
Post by: johnrm on January 25, 2015, 04:08:16 PM
Fell of your bicycle Auralabuse?
Get straight back up, you know it will be worth it!
Title: Re: first BIAB attempt
Post by: rje66 on January 25, 2015, 07:50:45 PM
Curious about the mistakes,do divulge, purely for learning purposes ;)

What kind of time would a typical Biab take???
Hope to get one on this week......
Title: Re: first BIAB attempt
Post by: auralabuse on January 25, 2015, 09:59:23 PM
Ooo where to start,  I didn't tie the bag properly so it fell into the boiler,  a quick retrieval attempt resulted in sharp pain to the hand area.  I think my cheapo eBay thermometer gave me dud readings coz my og ended up lower than expected so I reckon the temp was a bit too low.  But the end result is bubbling away and smells great so not too bad