Incase anyone was looking for handy stove top pot for small batches ( 1 - 2.5 gallons) Tesco are selling this 15lt Pot for €20
(http://dl.dropboxusercontent.com/u/24502376/20150124_214624.jpg)
Quote from: Acott on January 26, 2015, 08:18:38 AM
Incase anyone was looking for handy stove top pot for small batches ( 1 - 2.5 gallons) Tesco are selling this 15lt Pot for €20
(http://dl.dropboxusercontent.com/u/24502376/20150124_214624.jpg)
Cheers for the link but that pot appears to be Aluminium in which case it is not advisable to use to boil wort,as a HLT it would be fine though. ;D
Looks more like brushed stainless steel to me, but it should say on the label.
Quote from: Bubbles on January 26, 2015, 11:58:42 AM
Looks more like brushed stainless steel to me, but it should say on the label.
Ditto :)
Hmmm I didn't check the label :( the photo is too shaky to make out what it says!
It could be either, I'll swing by later and see for sure!
What's the reason why you shouldn't use Aluminium? I haven't heard this before :-[
Quote from: Acott on January 26, 2015, 12:09:08 PM
What's the reason why you shouldn't use Aluminium? I haven't heard this before :-[
Brewing myth
http://www.homebrewtalk.com/f11/faq-aluminum-pots-boil-kettles-49449/
Quote from: Pheeel on January 26, 2015, 01:07:29 PM
Quote from: Acott on January 26, 2015, 12:09:08 PM
What's the reason why you shouldn't use Aluminium? I haven't heard this before :-[
Brewing myth
http://www.homebrewtalk.com/f11/faq-aluminum-pots-boil-kettles-49449/
Wort is acidic,acid errodes the passivity layer aluminium builds up allowing aluminium ions into wort,no myth boss. ;D
Quote from: Greg2013 on January 26, 2015, 01:26:15 PM
Quote from: Pheeel on January 26, 2015, 01:07:29 PM
Quote from: Acott on January 26, 2015, 12:09:08 PM
What's the reason why you shouldn't use Aluminium? I haven't heard this before :-[
Brewing myth
http://www.homebrewtalk.com/f11/faq-aluminum-pots-boil-kettles-49449/
Wort is acidic,acid errodes the passivity layer aluminium builds up allowing aluminium ions into wort,no myth boss. ;D
Interesting, I did some reading and it appears to have people split! Some saying the acidity level in wort is too weak to cause any harm, others claiming the aluminium pot can cause off flavours!
Quote from: Greg2013 on January 26, 2015, 01:26:15 PM
Quote from: Pheeel on January 26, 2015, 01:07:29 PM
Quote from: Acott on January 26, 2015, 12:09:08 PM
What's the reason why you shouldn't use Aluminium? I haven't heard this before :-[
Brewing myth
http://www.homebrewtalk.com/f11/faq-aluminum-pots-boil-kettles-49449/
Wort is acidic,acid errodes the passivity layer aluminium builds up allowing aluminium ions into wort,no myth boss. ;D
Is wort so acidic that it ates away aluminium :-\
I thought this had been debunked time and time again. Aluminium is fine for a boil Kettle.
That's good, I swung by last night and it turns out the pot is actually Aluminium. It's quite light, which is great if you are doing stove top.
Quote from: Acott on January 27, 2015, 08:10:33 AM
That's good, I swung by last night and it turns out the pot is actually Aluminium. It's quite light, which is great if you are doing stove top.
Do the handles look sturdy, capable of holding 15 litres of boiling hot wort?
The rivets holding the handle seem quite sturdy, there's 4 in each.
I wouldn't be moving it very far, stove to sink for cooling really. The only thing is the wall seems quite thin, maybe heat retention might be a headache!
Quote from: Acott on January 27, 2015, 09:12:09 AMmaybe heat retention might be a headache!
Probably. Assume you're doing BIAB in these pots? The high conductivity of the aluminium in conjunction with the small batch size (lack of thermal mass) will mean that you'll have to look at insulating the pot in some way. Either that or adding heat periodically during the mash. If you choose to add heat you'll have to think about how you're going to avoid scorching the bag itself.
A cake tray on the bottom will protect the bag. You could also move it into a preheated oven to keep the mash temp stable
Quote from: Bock on January 27, 2015, 08:37:06 AM
Quote from: Acott on January 27, 2015, 08:10:33 AM
That's good, I swung by last night and it turns out the pot is actually Aluminium. It's quite light, which is great if you are doing stove top.
There the same ones as before Christmas so. Only downside is they'll never work on induction.
You'd be lucky to get that size induction pot for twice the price.