(http://i.imgur.com/VmFUgbbl.jpg)
Overtightened it and it broke on me so I need to know exactly what size it is before finding out where to buy. It's for the co2 regulator. Any ideas? 2 cent coin beside it for reference
Quote from: delzep on March 02, 2015, 07:39:30 PM
(http://i.imgur.com/VmFUgbbl.jpg)
Overtightened it and it broke on me so I need to know exactly what size it is before finding out where to buy. It's for the co2 regulator. Any ideas? 2 cent coin beside it for reference
Delzep is it directly on the reg or attached to one of the gas hoses coming off the reg so i can check mine ? Chances are i have what you need foc anyway. ;D
I have a 3 way valve (hook up 3 cornies to the reg) and this is one of the output connections to the keg
Quote from: delzep on March 02, 2015, 07:54:49 PM
I have a 3 way valve (hook up 3 cornies to the reg) and this is one of the output connections to the keg
So it screws directly onto one of the brass outputs coming off the regulator ? ;D Reason i ask is it looks like a normal gas line JG from here. :-[
Is it the same sie as the JG fitting that screws onto the corny disconnect by any chance ? ;D
Quote from: Greg2013 on March 02, 2015, 07:56:09 PM
Quote from: delzep on March 02, 2015, 07:54:49 PM
I have a 3 way valve (hook up 3 cornies to the reg) and this is one of the output connections to the keg
So it screws directly onto one of the brass outputs coming off the regulator ? ;D Reason i ask is it looks like a normal gas line JG from here. :-[
Thats it exactly
If you look closely at the tubing end, the collar often has the part number embossed into it.
The bit that's broken of is a female thread?
Try to read any numbers on the collar and what's the diameter of the male thread?
Never spotted that...nice one Will
It says "P NSF.51 36 SK266.001 3/8""
I found a spare anyway, but would be handy to know the part number for future inevitable breakages. The spare has "P NSF.51 46 SK266.001 3/8"" but looks identical
Quote from: delzep on March 02, 2015, 09:46:43 PM
Never spotted that...nice one Will
It says "P NSF.51 36 SK266.001 3/8""
I found a spare anyway, but would be handy to know the part number for future inevitable breakages. The spare has "P NSF.51 46 SK266.001 3/8"" but looks identical
I have a few of "P NSF.51 43 SK266.001 3/8" here maybe they are suitable Delzep ? ;D
36...then 46...then 43
I wonder does this make a difference?
If it's from the corney keg GB check the google doc for the size.
Just checked one of mine and yes its from the GB.
Its a 1/4 NSF Female thread to a 3/8" tube.
Quote from: Will_D on March 03, 2015, 10:49:19 AM
Just checked one of mine and yes its from the GB.
Its a 1/4 NSF Female thread to a 3/8" tube.
Same as what goes on the corny discos so WillD ? ;D
Yes :)
Quote from: Will_D on March 03, 2015, 09:34:30 PM
Yes :)
Good to know because i have a rake of them here from the last GB and if i ever find a 3 way like delzep nice to know they will work ;D
Quote from: Greg2013 on March 03, 2015, 10:30:03 PM
Quote from: Will_D on March 03, 2015, 09:34:30 PM
Yes :)
Good to know because i have a rake of them here from the last GB and if i ever find a 3 way like delzep nice to know they will work ;D
Got mine on adverts.ie
Keep your eyes open!