Title: Corni keg/draught system equipment
Post by: kgarr on March 24, 2015, 10:17:37 PM
Post by: kgarr on March 24, 2015, 10:17:37 PM
Hi All,
I'm hoping that someone can put this gear to good use, I just don't have the time for it anymore with work, family etc.
- 70/30 Mixed gas tank, full (turned on once to check system for leaks)
- mixed gas regulator
- Co2 regulator (bought from US, may need adapter, never used it)
- insulated tubing (loads of different sizes)
- Many assorted JG fittings
- 3 x Corni kegs (pinlock)
- Pipe cutter
- pin lock gas in connection
- Miller tap
- Caladonian smooth tap
sell the lot for E180, if no offers I'll sell individually.
thanks,
Kevin
I'm hoping that someone can put this gear to good use, I just don't have the time for it anymore with work, family etc.
- 70/30 Mixed gas tank, full (turned on once to check system for leaks)
- mixed gas regulator
- Co2 regulator (bought from US, may need adapter, never used it)
- insulated tubing (loads of different sizes)
- Many assorted JG fittings
- 3 x Corni kegs (pinlock)
- Pipe cutter
- pin lock gas in connection
- Miller tap
- Caladonian smooth tap
sell the lot for E180, if no offers I'll sell individually.
thanks,
Kevin
Title: Re: Corni keg/draught system equipment
Post by: Vermelho on March 24, 2015, 10:30:58 PM
Post by: Vermelho on March 24, 2015, 10:30:58 PM
Is the Caledonia tap for stout? I'd be interested in the stout setup if so (mixed gas, mixed reg and stout tap). That is if you're splitting.
Just to note on the U.S. reg. I bought a tap rite one from America and it has a differnt nut for attaching to Irish co2. This was easily rectified and thanks to Ciderhead and AJ edge I got a new nut for free when I bought the gas. So easily fixed.
Paul
Just to note on the U.S. reg. I bought a tap rite one from America and it has a differnt nut for attaching to Irish co2. This was easily rectified and thanks to Ciderhead and AJ edge I got a new nut for free when I bought the gas. So easily fixed.
Paul
Title: Re: Corni keg/draught system equipment
Post by: delzep on March 24, 2015, 10:58:07 PM
Post by: delzep on March 24, 2015, 10:58:07 PM
Where are you based? I'd be interested in the lot
Title: Re: Corni keg/draught system equipment
Post by: Chris on March 24, 2015, 11:25:27 PM
Post by: Chris on March 24, 2015, 11:25:27 PM
If Delzep doesn't take it Id also be interested in the lot.
Title: Re: Corni keg/draught system equipment
Post by: Jonnycheech on March 25, 2015, 06:43:21 AM
Post by: Jonnycheech on March 25, 2015, 06:43:21 AM
Next in line if the others don't want. I'll take the lot!
Title: Re: Corni keg/draught system equipment
Post by: auralabuse on March 25, 2015, 11:42:13 AM
Post by: auralabuse on March 25, 2015, 11:42:13 AM
Quote from: delzep on March 24, 2015, 10:58:07 PMThat's a fantastic offer, I have a similar set up, pints of Homebrew on tap is a special thing ;)
Where are you based? I'd be interested in the lot
Title: Re: Corni keg/draught system equipment
Post by: Vermelho on March 25, 2015, 02:20:11 PM
Post by: Vermelho on March 25, 2015, 02:20:11 PM
Damn all of you with your whole offers!
Title: Re: Corni keg/draught system equipment
Post by: Hop Bomb on March 25, 2015, 07:39:12 PM
Post by: Hop Bomb on March 25, 2015, 07:39:12 PM
Whoever takes this lot - Id be happy to swap you ball lock cornies for these pin lock ones.
Cheers
Cheers
Title: Re: Corni keg/draught system equipment
Post by: kgarr on March 26, 2015, 08:58:20 PM
Post by: kgarr on March 26, 2015, 08:58:20 PM
Thanks for your interest lads, sold to 'arse biscuits' on beoir. Mods please lock up
Title: Re: Corni keg/draught system equipment
Post by: Vermelho on March 26, 2015, 09:07:38 PM
Post by: Vermelho on March 26, 2015, 09:07:38 PM
Although I wish I could've gotten the nitro kit I'm glad it went to arsebiscuits, great name
Title: Re: Corni keg/draught system equipment
Post by: delzep on March 27, 2015, 01:20:52 AM
Post by: delzep on March 27, 2015, 01:20:52 AM
For fuck sake what's the point in having rules on here
Quote1. When selling, all dealing to be done on thread. Please be clear about the state of sale here and declare if it's for sale elsewhere for clarity
Title: Re: Corni keg/draught system equipment
Post by: johnrm on March 27, 2015, 07:53:16 AM
Post by: johnrm on March 27, 2015, 07:53:16 AM
It was for sale on beoir also.
Title: Re: Corni keg/draught system equipment
Post by: delzep on March 27, 2015, 09:07:41 AM
Post by: delzep on March 27, 2015, 09:07:41 AM
No mention of that in the ad
Title: Re: Corni keg/draught system equipment
Post by: DEMPSEY on March 27, 2015, 01:49:11 PM
Post by: DEMPSEY on March 27, 2015, 01:49:11 PM
Hard luck Delzep, you offered in 41 minutes of post but apparently not quick enough :o :(
Title: Re: Corni keg/draught system equipment
Post by: johnrm on March 27, 2015, 08:24:05 PM
Post by: johnrm on March 27, 2015, 08:24:05 PM
It's a bit unfair. I was 2nd bid recently, received a pm from seller, double checked with 1st, and missed the sale. There's etiquette in these things...
Title: Re: Corni keg/draught system equipment
Post by: mcgrath on March 27, 2015, 10:54:45 PM
Post by: mcgrath on March 27, 2015, 10:54:45 PM
Quote from: johnrm on March 27, 2015, 08:24:05 PMAnd then you gave the man who took it from you a medal!
It's a bit unfair. I was 2nd bid recently, received a pm from seller, double checked with 1st, and missed the sale. There's etiquette in these things...
Title: Re: Corni keg/draught system equipment
Post by: googoomuck on March 27, 2015, 11:06:04 PM
Post by: googoomuck on March 27, 2015, 11:06:04 PM
If it's for sale elsewhere what difference does it make?! If you know it's for sale on beoir would you put in an offer there over here or what's the story? Genuine question lads, can't see the problem here.
Title: Re: Corni keg/draught system equipment
Post by: johnrm on March 27, 2015, 11:17:10 PM
Post by: johnrm on March 27, 2015, 11:17:10 PM
Rule no. 1 '...declare if it's for sale elsewhere for clarity.'
Title: Re: Corni keg/draught system equipment
Post by: googoomuck on March 27, 2015, 11:17:42 PM
Post by: googoomuck on March 27, 2015, 11:17:42 PM
Quote from: johnrm on March 27, 2015, 11:17:10 PMWhy though?
Rule no. 1 '...declare if it's for sale elsewhere for clarity.'
Title: Re: Corni keg/draught system equipment
Post by: johnrm on March 27, 2015, 11:19:17 PM
Post by: johnrm on March 27, 2015, 11:19:17 PM
So that issues like this don't arise?
Title: Re: Corni keg/draught system equipment
Post by: googoomuck on March 27, 2015, 11:25:59 PM
Post by: googoomuck on March 27, 2015, 11:25:59 PM
Someone lost out on a bargain cause they didn't check two sites?!?! I can't see the issue here. If the op posted that the items were for sale on a number of sites would that persuade/dissuade someone making an offer?!
Title: Re: Corni keg/draught system equipment
Post by: johnrm on March 27, 2015, 11:50:46 PM
Post by: johnrm on March 27, 2015, 11:50:46 PM
(I don't mean to pick on this sale, unfortunately it raises a valid point.)
This is a small community where honor plays a big part.
There is a core bunch who bend over backwards to help someone out, delivering, storing, group buys, answering questions etc.
I could sway competitions I judge in but I don't, again, honor. The people that organise these and give their time voluntarily are honorable and trustworthy.
I mentioned rule number 1.
I also mentioned etiquette.
Simple, common sense stuff like this makes this place work.
This is a small community where honor plays a big part.
There is a core bunch who bend over backwards to help someone out, delivering, storing, group buys, answering questions etc.
I could sway competitions I judge in but I don't, again, honor. The people that organise these and give their time voluntarily are honorable and trustworthy.
I mentioned rule number 1.
I also mentioned etiquette.
Simple, common sense stuff like this makes this place work.
Title: Re: Corni keg/draught system equipment
Post by: Oh Crap on March 28, 2015, 12:54:39 AM
Post by: Oh Crap on March 28, 2015, 12:54:39 AM
No more then adverts or the like... "It's for sale elsewhere so ad can be removed at any time" SIMPLE
Title: Re: Corni keg/draught system equipment
Post by: Qs on March 28, 2015, 01:05:42 AM
Post by: Qs on March 28, 2015, 01:05:42 AM
Quote from: googoomuck on March 27, 2015, 11:17:42 PMBecause you're getting a service from the site when you decide to sell and the least you can do is follow the rules.Quote from: johnrm on March 27, 2015, 11:17:10 PMWhy though?
Rule no. 1 '...declare if it's for sale elsewhere for clarity.'
Title: Re: Corni keg/draught system equipment
Post by: johnrm on March 28, 2015, 07:19:10 AM
Post by: johnrm on March 28, 2015, 07:19:10 AM
Maybe we should charge for the service... 
Title: Re: Corni keg/draught system equipment
Post by: Damo on March 28, 2015, 10:04:23 AM
Post by: Damo on March 28, 2015, 10:04:23 AM
This is a strange one ???
Has anyone looked at the timing here?
The kit was first listed on Beoir in Feb, listed here on the 24 March.
Delzep offers on the day.
Arse...Biscuits joins here on the 24th, joins Beoir same day and gets it on first post :o
Has anyone looked at the timing here?
The kit was first listed on Beoir in Feb, listed here on the 24 March.
Delzep offers on the day.
Arse...Biscuits joins here on the 24th, joins Beoir same day and gets it on first post :o
Title: Re: Corni keg/draught system equipment
Post by: johnrm on March 28, 2015, 10:17:20 AM
Post by: johnrm on March 28, 2015, 10:17:20 AM
There is no point in dissecting this any further.
There are rules for sale to make the process as fair as possible for all parties.
Please comply with these and there should be no issue going forward.
I suggest this thread is locked as the item is now sold.
There are rules for sale to make the process as fair as possible for all parties.
Please comply with these and there should be no issue going forward.
I suggest this thread is locked as the item is now sold.
Title: Re: Corni keg/draught system equipment
Post by: kgarr on March 28, 2015, 11:54:11 AM
Post by: kgarr on March 28, 2015, 11:54:11 AM
Apologies lads, I should've read that rule. I only stuck it here as I couldn't seem to move it on beoir. I should've put it on here first, as you are a great bunch and have answered many of my questions,
Regards,
Kevin
Regards,
Kevin
Title: Re: Corni keg/draught system equipment
Post by: johnrm on March 28, 2015, 12:34:47 PM
Post by: johnrm on March 28, 2015, 12:34:47 PM
Thanks for the update Kevin.
Title: Re: Corni keg/draught system equipment
Post by: delzep on March 28, 2015, 08:52:14 PM
Post by: delzep on March 28, 2015, 08:52:14 PM
Quote from: johnrm on March 28, 2015, 10:17:20 AM
There is no point in dissecting this any further.
There are rules for sale to make the process as fair as possible for all parties.
Please comply with these and there should be no issue going forward.
I suggest this thread is locked as the item is now sold.
Ah right yeah it's all grand isn't it
Yeah I'm pissed off cos it was a good deal that I didn't get, but if it's brushed under the carpet as you suggest then what's the point in having rules in this section? No sign of any mods or admin comments is a bit alarming
Title: Re: Corni keg/draught system equipment
Post by: johnrm on March 28, 2015, 09:09:03 PM
Post by: johnrm on March 28, 2015, 09:09:03 PM
+1
Title: Re: Corni keg/draught system equipment
Post by: mcgrath on March 28, 2015, 09:22:53 PM
Post by: mcgrath on March 28, 2015, 09:22:53 PM
Quote from: johnrm on March 28, 2015, 09:09:03 PMI know if I was having someone around to my place to collect stuff, I'd pick the guy people can vouch for over a new member I don't know called "arse biscuit".Sorry AB, I'm sure your cool :)
+1
I'm not convinced its that good a deal tbh. If you can source cheap pinlock disconnects maybe, but I can't and that would put me off.
Title: Re: Corni keg/draught system equipment
Post by: arse..biscuits on March 30, 2015, 05:42:04 PM
Post by: arse..biscuits on March 30, 2015, 05:42:04 PM
Hi lads, I bought the gear. I saw the ad on Beoir and jumped at it, it was up a few weeks and people were just giving ridiculous offers, I gladly paid the asking price.
Nothing strange going on, I used to brew and I'm just getting back into it so need some gear, and I just came across this website last week. I used to post on the brewing section on Boards.ie years ago under the same name.
Anyway, just thought I'd help to clear things up.
I'm hoping to meet up with the Capital Brewers soon.
All the best..
Colin.
Nothing strange going on, I used to brew and I'm just getting back into it so need some gear, and I just came across this website last week. I used to post on the brewing section on Boards.ie years ago under the same name.
Anyway, just thought I'd help to clear things up.
I'm hoping to meet up with the Capital Brewers soon.
All the best..
Colin.