Anyone have a source for stir bars? I'm down to my last half decent sized one and need to restock.
Where are they going!
Down the jax I reckon. I've tipped the whole starter a few times into the fermenter and forgotten all about the bar being in the bottom of the bucket.
I might do a group buy on them if people could agree on a common size. Say 20mm
After a bit of googling they are pretty cheep from China.
What size would you recommend for 3L flask?
I use 20mm and its grand.
11 bars per set here, 3 styles to choose from
http://www.ebay.ie/itm/161228187379?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I know the flat and the ones with the ridge work well no experience with the rugby ball style
I have the rugby ball type and they work well.
Quote from: nigel_c on May 27, 2015, 06:03:11 PM
Down the jax I reckon. I've tipped the whole starter a few times into the fermenter and forgotten all about the bar being in the bottom of the bucket.
Next time you tip the whole starter into the fermenter use magnet to catch stirr bar at the bottom of a flask.
Just a quick question regarding the optimum size of the stir. I've read a few place where they say 1 inch (26mm) and 1.5 inches (38mm) works well, but people use up to 2 inches (52mm) for a 2 liter flask. Does anybody have any opinions on what size is sufficient?
I'm currently piecing together a diy stir plate and just wondering if the magnet placement will have a knock on effect to the size of the stir bar.
it totally depends on the space you have the magnet underneath set at
Bigger gap bigger bar.
Quote from: Ciderhead on May 28, 2015, 05:26:14 PM
it totally depends on the space you have the magnet underneath set at
Bigger gap bigger bar.
Thanks. I know what to do now.
here's my down and dirty one that can handle 5L erlenmeyer
Its better than the one I paid $40 from the US for
http://www.nationalhomebrewclub.ie/forum/index.php/topic,5056.msg63051.html#msg63051