Hi,
anyone who has one of these, could you tell me what size line the barb on the back of them is? just want to order some tubing for it...
Cheers!
Ed
PS this type http://www.aliexpress.com/item/Forward-Seal-Tap-w-80mm-long-shank-Beer-Tap-Kegging-Equipment-Homebrew-Supply/32276452446.html
Can anyone give a review on these? Ive the real ones. Thought about buying some of the replicas but there is a few bad reviews on aliexpress. Whats the craic with them?
I've turned off aliexpress after getting quick disconnects. they look the part but they leak everywhere.
If it's got moving parts or needs to be watertight, I look elsewhere now.
Quote from: molc on June 15, 2015, 12:59:39 PM
I've turned off aliexpress after getting quick disconnects. they look the part but they leak everywhere.
If it's got moving parts or needs to be watertight, I look elsewhere now.
Maybe it's not aliexpress that's the issue though, perhaps it's the parts and I would guess that there's a few suppliers over this side of the world selling exactly the same parts... I suppose the old "you get what you pay for" addage still holds true here.
I might be in the same boat with this tap, and if I am, I'll order a genuine one from the states :-\
PS Still need to know the ID of the tubing required ! ;D
Quote from: molc on June 15, 2015, 12:59:39 PM
I've turned off aliexpress after getting quick disconnects. they look the part but they leak everywhere.
If it's got moving parts or needs to be watertight, I look elsewhere now.
Where did you get the disconnects? I've been using stainless quick disconnects from aliexpress which do what they should do.
The Ali white gas ones were crap, I ended out chucking a few as well, no point now with lower price in HBC as well.
Ed that should be standard 3/8, warm flame and jubilee clip is your friend there in any case
I have them and its not amazing. Thinking of getting real perlicks. You really have to push the tap handle back to stop leaks. Which is all well and good until you've had a few.
Quote from: Ciderhead on June 15, 2015, 02:16:48 PM
Ed that should be standard 3/8, warm flame and jubilee clip is your friend there in any case
Cheers, but the 3/8" line I got from mybeerandwine is grand for the gas - fits the JG fittings perfect, but it's too big for the tap, so I'm guessing it's 5/16" but not sure that it's not 3/16" :(
I'll stick a vernier on it when I get home, I was just chancing my arm that someone here might know so I could order it today!
Quote from: Ciderhead on June 15, 2015, 02:16:48 PM
The Ali white gas ones were crap, I ended out chucking a few as well, no point now with lower price in HBC as well.
Ed that should be standard 3/8, warm flame and jubilee clip is your friend there in any case
I agree with the pricing on HBC now plus your full member discount you would be better off getting them there. ;D
These were the 1/2 bsp male/female disconnects for my brewery tubing. I can kind of get them to work if I put 2 o rings in, but they end up displacing right at the wrong moment.
They all looked the same and had the rough same price in the site, so just picked one at random.
Brewpi store sell camlocks for almost the same cost so just going to get all my gear there.
I was tempted to get some Chinese ones,but after reading reviews of them I decided against it. but my uncle is coming home during the summer so I'm getting some proper ones.
Cheers. Ive a bunch of leaky stainless QD's I bought from MB&W. Load of shite. Went with the ones from morebeer.com & they're class. I actually have a bunch of female QDs from morebeer surplus if anyone is interested in buying them. The male QD's from mb&w are fine, just the females dont seal at all.
I bought real Perlicks after a bit of indecision on whether to just get the Chinese ones but at the end of the day I'd rather just pay once for quality than have to eventually shell out again after buying cheap. I bought 5 of the 630ss taps and am really happy with them. The initial investment is high but buy stainless and you'll never have to replace them if maintained right.
Quote from: Hop Bomb on June 15, 2015, 11:33:19 PM
Cheers. Ive a bunch of leaky stainless QD's I bought from MB&W. Load of shite. Went with the ones from morebeer.com & they're class. I actually have a bunch of female QDs from morebeer surplus if anyone is interested in buying them. The male QD's from mb&w are fine, just the females dont seal at all.
I'm looking for 3. Guessing the male connects will be the same as morebeerandwine. On holidays for the next 2 weeks but send me a pm with prices and postage to Dublin and I'll get back to you when I'm home.
So, I measured the barb and ordered 3/16" or 5mm tubing, should be a nice tight fit.
Quote from: Hop Bomb on June 15, 2015, 11:33:19 PM
Cheers. Ive a bunch of leaky stainless QD's I bought from MB&W. Load of shite. Went with the ones from morebeer.com & they're class. I actually have a bunch of female QDs from morebeer surplus if anyone is interested in buying them. The male QD's from mb&w are fine, just the females dont seal at all.
Did you have any hassle getting the stuff from USA from Morebeer.com and what was shipping like ? They have some good items on there but i always stayed away because i got sick of dealing with USA sites that wanted $50 to ship a QD and the like and assumed they would be the same. ;D
I got a bunch of stuff shipped from morebeer to a friend in San Francisco who then forwarded it on to avoid customs. I got the blichmann chiller & burner plus every bit of hardware I needed for my brewery build. I sent my mate 120e which covered p&p plus few pints for himself. The morebeer qd's are the real deal.
We designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why MoreBeer! Stainless QD fittings have a near unanimous 5 star review.
Quote from: Ed on June 16, 2015, 09:22:50 AM
So, I measured the barb and ordered 3/16" or 5mm tubing, should be a nice tight fit.
So, that was hard than expected (to get tubing to fit).... so in the end I just ordered this - http://www.amazon.com/gp/product/B00829HLSA?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 and it's a perfect it, comes with tubing that fits the adapter on my connector (3/16" ID) so I might finally get some beer out of this keg!
Anyone else buy one of the Chinese knock-offs? I'm very tempted to buy one but I'm fearing the worst.
Why would you risk it, considering the great value GB for taps we are just closing?
Johnny won't be able to see the group buy forum as he's not a full member.
Quote from: Ciderhead on July 21, 2015, 07:30:32 AM
Why would you risk it, considering the great value GB for taps we are just closing?
Apologies Johnny I made that post on tapatalk and didn't see you weren't a FM.
I should be, I only renewed about a month or two ago. :(
Heads will roll for this :P
Membership secretary is on his holliers :(
Boo-urns! Hopefully I can still see what's happening in regards to the chugger GB, I'm in for two with payment looming. Who's the secretary? Partridge?
Partridge is secretary, but I don't remember giving him time off. :P
One of the admin team should be able to check it in the mean time.
Quote from: Ciderhead on July 21, 2015, 06:45:34 PM
Membership secretary is on his holliers :(
Is this allowed. :D
I just checked and it looks like JC is a full member. Post up if any issue.
Cheers johnrm. I checked my Paypal history and indeed I did make a payment to the club for €10.60 in June. I'm legit I tells ya!
To me it looks like everything is in order for you at this point.
i.e. you are showing as full member.
Let me know if anything is amiss.
Ta.