• Welcome to National Homebrew Club Ireland. Please login or sign up.
July 18, 2025, 09:07:50 PM

News:

Renewing ? Its fast and easy - just pay here
Not a forum user? Now you can join the discussion on Discord


Chest freezer to a fermentation chamber

Started by murt, February 10, 2017, 11:04:00 AM

Previous topic - Next topic

murt

Hi Guys,

Going using my chest freezer as a fermentation chamber. I'm going installing a tube heater & want to drill a hole for the wire as the top won't close with the wire.

Does anyone know where the safest spot to drill as I don't want to hit any of the cooling rings/tubes on freezer wall?

Any suggestions?

Cheers

DEMPSEY

I had an ice cream fridge that I wrecked by hitting the gas pipe on the corner  :-[. If you cannot be certain where the cooling pipes are then try Google or YouTube with the brand of fridge you have.
Dei miscendarum discipulus
Forgive us our Hangovers as we forgive those who hangover against us

phynes1

Look for the equipment specification documents online. There should be diagrams and schematics available. 
___________

PH

Eoin

There is a method using corn starch to find the pipes, google it.

Leann ull

dont drill, although for cost reasons most chilling is in the floor of lower priced CF's
pierce outer skin
with a nail or dart gently gently push through removing foam as you go measure wall thickness so that you know based on the length of your nail when you have hit inside, obviously if you meet any resistance stop!
If you remove too much foam don't panic a squirt of that expanding stuff next time you have a job for it will cover it.

murt

ok. Cheers guys. Ill google the cornstarch method if not Ill try with the nail
Thanks  :)

murt

"clean the outside of the fridge. make a thin mixture of cornstarch and alcohol, paint it on the area you plan to drill. paint it in a few other places too, just to be sure it works. turn the fridge to its coldest setting. you will likely see a ghost of the coils after a while. don't drill in that spot."

https://www.beeradvocate.com/community/threads/access-port-through-side-of-a-refrigerator.16624/

dcalnan

Drill through the top? It's only sandwiched  insulation


Leann ull

Or a channel in the lip and backfill with silicone

auralabuse


Leann ull


auralabuse

Its a signature the new upgrade of tapatalk seems to have pulled in from another music forum :(

http://www.soundcloud.com/aural-abuse