• Welcome to National Homebrew Club Ireland. Please login or sign up.
May 20, 2025, 11:02:14 PM

News:

Want to Join up ? Simply follow the instructions here
Not a forum user? Now you can join the discussion on Discord


Keggle Ardbir Build

Started by Sorcerers Apprentice, March 26, 2016, 10:01:11 PM

Previous topic - Next topic

Sorcerers Apprentice

The app is super easy to use however, I cannot drive the Ardbir to operate manually via pwm only. In manual you can only set a temperature and the ardbir works as a pid controller. It would be very handy if there was an option to operate as a pwm directly from the manual screen to simplify tuning the pid control
There's no such thing as bad beer - some just taste better than others

molc

Quote from: Sorcerers Apprentice on March 31, 2016, 02:15:39 PM
The app is super easy to use however, I cannot drive the Ardbir to operate manually via pwm only. In manual you can only set a temperature and the ardbir works as a pid controller. It would be very handy if there was an option to operate as a pwm directly from the manual screen to simplify tuning the pid control
You can technically, assuming they haven't put some min and max values in place.

The ArdBir has two modes - temp and PWM. Once you reach your boil temp, as set in the parameters menu, it automatically switches to pwm. I haven't tried it, but you should be able to set it to boil at 0C and then just use PWM as you'd normally expect.

The ArdBir really does miss a data logging mode though. That and a webpage/mobile app and it would be stellar. I think BrewPi will eventually get there in this regard, in about 5 years :P
Fermenting: IPA, Lambic, Mead
Conditioning: Lambic, Cider, RIS, Ole Ale, Saison
On Tap: IPA, Helles, Best Bitter

pob

From memory you're only able to adjust the boil temp to only 3-4°C below 100°C.

If you rewrote the code you could bring figures down to mash levels (should be easy enough to find - although could be in Italian).

Adapted for a Spark type board (built in WiFi, etc), you'd really have a great device.

It's quite limited in that it uses the full 32k on an Arduino.

Sorcerers Apprentice

Plus I don't think you can step past alpha amylase step without heating to a minimum of 60C, you can't jump directly to boil, and it uses pid to reach boil temp then reverts to pwm
There's no such thing as bad beer - some just taste better than others

Sorcerers Apprentice

I was in Lidl yesterday and picked up one of their patio/balcony parasols for around €14. I drilled 2 x 32mm holes in my Hill Billy brewing table and now have an all weather brewing station 😆



Sent from my SM-G900F using Tapatalk

There's no such thing as bad beer - some just taste better than others

Sorcerers Apprentice

I may have to change the name from The Dalek to The Caped Crusader 😆

Sent from my SM-G900F using Tapatalk

There's no such thing as bad beer - some just taste better than others

Sorcerers Apprentice



Sent from my SM-G900F using Tapatalk

There's no such thing as bad beer - some just taste better than others


DEMPSEY

Is it not a Dalek disguising itself as a cocktail  :D
Dei miscendarum discipulus
Forgive us our Hangovers as we forgive those who hangover against us

Sorcerers Apprentice

Quote from: DEMPSEY on April 25, 2016, 04:45:52 PM
Is it not a Dalek disguising itself as a cocktail  :D
Always the hurtful comments 😢

Sent from my SM-G900F using Tapatalk
There's no such thing as bad beer - some just taste better than others