Cornie Kegs, coolers and gas regs

[eddieken]

5 pin lock kegs (1 has slight leak on poppit valve, put is fine if disconnect is attached) €50 each
5 4 ball lock kegs €50 each
3 sets of pin lock disconnects (in and out) €50 per set
2 sets of ball lock disconnects (in and out) €50 per set

3 line cooler €120
2 line cooler €100

Bass table top tap €50 needs drip tray, slight scratches
Carlsberg tap €35 slight damage to top of handle
Smithwichs tap €40
Guinness tap €35
Bud tap €40

3 line gas regular €100
6 line gas manifold (needs main regular) €80
5kg C02 gas bottle with gas reg €60 (over half full)
9 kg c02 bottle (this was filled and never used) €30SOLD

Updated list

Eddie

[alealex]

Deal, 180 then for 4. will pm soon.

[Vermelho]

Next in line for ball locks if this falls through

[eddieken]

5 pin lock kegs (1 has slight leak on poppit valve, put is fine if disconnect is attached) €50 each
5[/s] 4 ball lock kegs €50 eachsold
3 sets of pin lock disconnects (in and out) €50 per set
2 sets of ball lock disconnects (in and out) €50 per setsold

3 line cooler €120sold
2 line cooler €100

Bass table top tap €50 needs drip tray, slight scratches
Carlsberg tap €35 slight damage to top of handle
Smithwichs tap €40
Guinness tap €35
Bud tap €40

3 line gas regular €100
6 line gas manifold (needs main regular) €80
5kg C02 gas bottle with gas reg €60 (over half full)
9 kg c02 bottle (this was filled and never used) €30SOLD

Updated list

Eddie

Going to keep the rest of equipment for the time being, talking to a few people has put the goo back on me to at least try extract brew in the few while.

[nigel_c]

You went all out on Beoir a good few years back putting your kit together. What happened? loose interest?
I'd be interested in the Co2 reg if its still around.

[eddieken]

You went all out on Beoir a good few years back putting your kit together. What happened? loose interest?
I'd be interested in the Co2 reg if its still around.

Yeah, a few family/personnel issues took centre stage and the brewing was put on to back burner. The kit was sitting there feeling all lonely and ignored for the guts of over 2 years, so I thought I'd let it be loved by others.
Keeping what's left as I might give extract a whirl over the next while.

eddie

[kgarr]

Hi Eddie, would you still be have a set of pin lock disconnects? Be interested in a set if you do?