Herms Return or Sparge Arm?

[Leann ull]

Arrived from Ali today

[DEMPSEY]

Looks like a CIP ball. 

[Leann ull]

That's the one, spinning head version also en route.

[molc]

God dont tempt me. Really like the idea of using one om the herms return in a lifetime, then using that same lid post boil to clean down the Bk. Don't think it can lift the boiled I'm crud without strong chemicals though, which has stopped me so far.

[darren996]

Have you got a link for that CH?

Sent from my GT-I9505 using Tapatalk

[nigel_c]

I was considering using one of these in my build. Was going to put it on an arm with a quick disconnect in the mash return. I went with the simple silicone hose. Interested to see how you get on with it.

[Leann ull]

Have you got a link for that CH?

Sent from my GT-I9505 using Tapatalk

Ali express just type in cip spray head

[darren996]

Cheers

Sent from my GT-I9505 using Tapatalk

[SkiBeagle]

DailyAppliance2012 have some nice ones too. Bought some stuff from them before - very good.

http://www.aliexpress.com/store/product/1-2-Female-Thread-Sanitary-Rotating-Spray-Ball/115452_32594187207.html

Don't think I'd use one for sparge - too much aeration. I just drop a silicone return hose below the waterline, weighed down with a little stainless steel duda.

[Shanna]

For stuff sent by Ali express is it sent by regular snail mail? Recently got stung by stuff sent from a seller on eBay with free transport whose stuff was delivered by ups who charged me €40 customs & administration.

Shanna

[dcalnan]

Anything I've gotten from aliexpress has been a registered anpost delivery.

[Leann ull]

The pretty cousin arrived yesterday



Tested against the previous product at full open bore and 50% throttle on both, she may be pretty but not worth a shite even at full whack, lot lost through the bearing, will probably donate to a brewery that pushes 50l a min for cleaning or use as a garden sprinkler!
Proves the old adage about keeping it simple.

[SkiBeagle]

Registered snail mail. Takes about 30 days. Slow but reliable. Like CH's hare/tortoise clip. Never had a problem with AliX. I do hate the long delay though.

CH: that spinner looks great. Temptation....

[nigel_c]

I think I'll stick with the mash return setup I have so.

[darren996]

I have a couple of keg fvs that I could use one of those to rinse,  they look the biz

Sent from my GT-I9505 using Tapatalk