Cleaning beer lines

[Pheeel]

I have one of these. https://www.amazon.co.uk/gp/aw/d/B002NLMBOM

I have a small hose with a liquid corny post at the end which fits in the top of the pump. I do about 15 mins with oxy, 10 rinse and 10 sanitiser

[Pheeel]

Piccy

[Sokratees9]

Ah yes, that is what I need, and I just realised that one of my connectors for the corny kegs is not JG, so my plan wouldn't quite work!  Where can I buy the corny keg post though?  I did a search around on google and found this:

https://www.ebay.co.uk/i/201694303679?chn=ps&var=501469822548&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&itemid=501469822548_201694303679&targetid=855313181933&device=c&mktype=pla&googleloc=1007276&campaignid=6619151996&mkgroupid=88031187549&rlsatarget=pla-855313181933&abcId=1140496&merchantid=113532009&gclid=CjwKCAiAvonyBRB7EiwAadauqaGZ_lm8Ml_NJ9p-D3_eSwIUoeGYKkef3LL1KXjYHkQ5h325f_yErhoC5ekQAvD_BwE

But it didn't have a barb like yours, which I think would be ideal

I bought a pump already, so nearly ready to go

[Sokratees9]

Ok, so from a bit of further seaching, I think I need the following:

3/8" Barb x 1/4" FPT
1/4" MPT x 19/32" Plug Adapter
19/32 Ball Lock Liquid Post

Anyone the best places (Ireland or UK) to pick up these things?  Obviously I'll google around, and might find what I need quickly, but any good recommendations would be great.  Or if there is simply a single piece I can buy (the one in the photo looks like one piece), that would be perfect.

[pob]

Stainless Carbonator with 5/16" Barb from Homebrew Company, €14.95

Or cheaper from China, but a 3-5 week delivery.

[Pheeel]

Stainless Carbonator with 5/16" Barb from Homebrew Company, €14.95

Or cheaper from China, but a 3-5 week delivery.

I think I got mine off Ali but that's the same idea

[dcalnan]

Just remember an post have stopped deliveries from China. So buying from the homebrew company, or a European shop is probably the best way.

[Raxy]

website says they've stopped all mail going to China, not from. In saying that I've had an item that shows with last mile carrier for 2 weeks but no sign of delivery 

Just spoke to an post. It is all post too & from.

[Sokratees9]

The cerbonator looks like just the job, but it sounds like (from the description) that it is for the gas side, but I want to hook it up to the beer out line.  I know there are slight differences in the ball lock connectors so you can't do that, so I'd be surprised this would work for both.  It's not a problem if the fit isn't perfect, as the cleaning fluid will jsut run back down the line into the bottle, as long as there is enough of a fit for it to also push the cleaning fluid up and out the tap at the top.

[dcalnan]

Most of those carbonation fittings are designed to fit gas and liquid.

[Sokratees9]

Cheers, then I'll give that a go