STC1000 enclosure

[Frequent Sequence]

 Hey Metattron. I'm just about to start putting one of these controllers together. I was wondering if you could tell/show pics of, how you mounted the plug sockets to the inside of the enclosure.

Thanks, Seán

[Metattron]

I cut holes that were just big enough for the guts of the socket to go through, then used a back box for the socket on the inside, the thin type. The screws clamp the box and socket to the lid. Does that make sense? If you're using the same enclosure then make sure you measure up correctly as there is just enough space for the stc and two standard sockets.

[Frequent Sequence]

Yeah that makes sense. It's what I had planed to do. I was just doubting I had the right parts. Thanks for the quick reply. Glad I have the right bits.

Seán

[Ciderhead]

a search on the forum you will find loads of pics
I mounted on the sides


Sent from 1 of 300,000,000