John Guest Cornelius Keg Fittings.

[Greg2013]

Due to needing to upgrade some small bits and bobs i am looking for the following, JG fitting for gas in disconnect,JG fitting for beer out disconnect,JG fitting for CO2 regulator connect.Also 3/8 JG gas line and 5/16 JG Beer line(i think those are the correct diameters?).I also need some JG splitters for running several kegs off the one CO2 tank.  Hoping to get two more cornie kegs in the next couple of weeks so i will also likely need some actual disconnects for those as well 

I have tried the three amigos here in Ireland but as usual those that do them are out of stock with months  :

[Jacob]

Did u checked mybeerandwine.ie?  :

http://www.mybeerandwine.ie/advanced_search_result.php?keywords=john&Submit.x=0&Submit.y=0&Submit=Search
http://www.mybeerandwine.ie/kegging-systems-disconnects-c-140_141_145.html
http://www.mybeerandwine.ie/advanced_search_result.php?keywords=line&Submit.x=0&Submit.y=0&Submit=Search

[Greg2013]

Did u checked mybeerandwine.ie?  :

http://www.mybeerandwine.ie/advanced_search_result.php?keywords=john&Submit.x=0&Submit.y=0&Submit=Search
http://www.mybeerandwine.ie/kegging-systems-disconnects-c-140_141_145.html
http://www.mybeerandwine.ie/advanced_search_result.php?keywords=line&Submit.x=0&Submit.y=0&Submit=Search

Aaaah no boss 

[Ciderhead]

I use this guy
http://www.ebay.co.uk/sch/lig5150/m.html?_nkw=&_armrs=1&_ipg=&_from=

[Greg2013]

I use this guy
http://www.ebay.co.uk/sch/lig5150/m.html?_nkw=&_armrs=1&_ipg=&_from=

Messaged that guy CH but he only has the JG bit for the regulator and the beer line plus a co2 line splitter,he does not have the pieces that screw on to the disconnects

[pob]

Or these guys
http://www.hopandgrape.co.uk/public/detailv1.asp?itemcode=QUI20173038

[Jacob]

Or MyBeerAndWine again 

http://www.mybeerandwine.ie/john-guest-female-adapter-cornelius-quick-disconnect-p-439.html

[Greg2013]

Or MyBeerAndWine again 

http://www.mybeerandwine.ie/john-guest-female-adapter-cornelius-quick-disconnect-p-439.html

Yep mybeerandwine it is, have all the other bits sorted except for the JG fittings for the disconnects so i will get those off MBW, never know i might see something else i like while i am on the site as well