Ss compression fittings

[Oh Crap]

As per the title
I'm looking for 2 1/2" to 3/8" compression fittings to weld to hlt.. Anybody know where I can get in ireland...
Cheers

[Sorcerers Apprentice]

The only real supplier of stainless plumbing fittings is BSS on the South Circular Road near Cork St

[nigel_c]

Maybe

https://www.thehomebrewcompany.ie/stainless-steel-herms-bulkhead-12-male-npt-x-38-compression-p-2961.html

[Sorcerers Apprentice]

I stand  corrected :-)

[Will_D]

As per the title
I'm looking for 2 1/2" to 3/8" compression fittings to weld to hlt.. Anybody know where I can get in ireland...
Cheers

Sorry, Don't understand your requiremet:

1/2" to 3/8" compression fittings implies an inline reduction. (As in copper 1/2" to 3/4") 
Where/what is the welding requirement?

Also for all SS fittings suggest you contact flowmax.ie on "de sout cide"!

[Oh Crap]

Maybe

https://www.thehomebrewcompany.ie/stainless-steel-herms-bulkhead-12-male-npt-x-38-compression-p-2961.html

I looked at them and they are weld less and I was planning on welding them, they would do the job as a last resort also €15 each is pricey imo

[Oh Crap]

As per the title
I'm looking for 2 1/2" to 3/8" compression fittings to weld to hlt.. Anybody know where I can get in ireland...
Cheers

Sorry, Don't understand your requiremet:

1/2" to 3/8" compression fittings implies an inline reduction. (As in copper 1/2" to 3/4") 
Where/what is the welding requirement?

Also for all SS fittings suggest you contact flowmax.ie on "de sout cide"!

I'm using them to repurpose my old ic as a herms coil... It being 3/8" and the cam locks being 1/2" female...
I'll try flowmax..
Cheers😄

[DEMPSEY]

Don't  bother with flowmax they do not stock them only to order.

[cruiscinlan]

Wait aren't compression fittings weldless?  Or am I missing something?

[Sorcerers Apprentice]

Not when they are passing through the wall of the HLT

[cruiscinlan]

Not when they are passing through the wall of the HLT

http://www.ebay.co.uk/itm/2-5-L-Kettle-Thermowell-Kit-Stainless-Steel-304-homebrew-thermometer/301716341481?_trksid=p2141725.c100338.m3726&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20150313114020%26meid%3D02e16433bfd643679c2d8c4970b646c1%26pid%3D100338%26rk%3D2%26rkt%3D21%26sd%3D301710133789

http://www.ebay.co.uk/itm/Stainless-Steel-homebrew-Weldless-Kettle-Ball-Valve-Kit-1-2-BSP/301717076184?_trksid=p2141725.c100338.m3726&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20150313114020%26meid%3D02e16433bfd643679c2d8c4970b646c1%26pid%3D100338%26rk%3D4%26rkt%3D21%26sd%3D301710133789


I'm a bit confused now, I thought guys were using weldless kits like the above to modify their pots/boil kettles etc. ?

[Sorcerers Apprentice]

It's for to convert the 1/2" supply from the mash tun to the 3/8" coil of the herms

[Sorcerers Apprentice]

I've just checked with BSS and they don't carry stainless  compression fittings, so it looks like the Homebrew company is your man

[Oh Crap]

I've just checked with BSS and they don't carry stainless  compression fittings, so it looks like the Homebrew company is your man

I ordered some from China with a couple of other bits..great if they work and cheap enough if they don't 😊 thanks for your efforts I appreciate it