Carboy Nylon Harness ?

[Greg2013]

With two carboys already and another two on the way i am asking if anyone on here has purchased one of these at a reasonable price and if so could they provide some information on the same please ? Also by reasonable price i mean less than 40.00 euro delivered to the door.Also if there is anyone on here willing to look into making such a setup please post same here,thanks again  Washable nylon or polyester is preferable, at least to me anyway

[Will_D]

I believe Eoin was going to ask his wife (she of the BIAB bags/Hop Bags/Etc) to look into this

I also would like one as I'm sure a few other carboy owners would

[Greg2013]

I believe Eoin was going to ask his wife (she of the BIAB bags/Hop Bags/Etc) to look into this

I also would like one as I'm sure a few other carboy owners would

I seem to remember that but i heard no more so i assumed it was a non runner ?

[beerfly]

was looking at one on ebay about €20 delivered. dont have any carboys yet but was thinking of one of them if i did

[Greg2013]

was looking at one on ebay about €20 delivered. dont have any carboys yet but was thinking of one of them if i did

Any chance of a link to that one ?

[beerfly]

http://www.ebay.ie/itm/270934952999?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_1529wt_1077

[Greg2013]

http://www.ebay.ie/itm/270934952999?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_1529wt_1077

Cheers for that Beerfly looks interesting. Hopefully someone here can come up with similar, otherwise that looks a good one

[Will_D]

So:

Why waste $20 on a ready made webbing harness from the US when you can waste a lot more money, time and effort making your own

Rule 1: Buy webbing online at about £10 for 50 meteres (of 25 mm) not the €2 a metere I paid in a yacht chandlers

Rule 2: Get someone else to make it. Took about 10 man hours to knock this up!!

Rule 3: Learn to use a sewing machine a long time ago and use it every daty. Starting from scratch is a learning experience.

Any ways here is the approx design and some photos.

Used about 6 metres of 25 mm polypropylene webbing.

[@ mention of plastic stuff:  @CH: Its blue, very pretty but is it FG?? ]

There is a third handle on the bottom to help when lifting onto a bench. All dimesions are approximate and adjust to fit you 'boy:

[Ciderhead]

Are you going to eat it?

[Greg2013]

Why waste my time making one when i can get one delivered for less than $30 Will D ? 

[Will_D]

Are you going to eat it?

No way - Its just that you are "the man" when it comes to mentioning plastics and brewin

PP, HDPE, N-66, LDPE, PE, PES, PVC, PS, PC, PU, HIPS, PET, ABS, ABV, "Poly Unsaturated X-linked New Polymer from Seabury Street (aka: PUSS the x,n, p are silent acronym providers)", Silicon Stuff, Artifical Rubbers, LRC (Durex)

Need I say more?

[Will_D]

Why waste my time making one when i can get one delivered for less than $30 Will D ? 

Errrrr!! : I think that was my point.

HOWEVER - if any wants to have a go there's the design!

Also If Eoin (and Mrs) fancys a go then feel free to copy this.

[Ciderhead]

I'm RC I know nothing about Durex

[Will_D]

I'm RC I know nothing about Durex

So why only 3 (admittedly lovely) kids then so?

Ah !! Light Bulb moment: You started to homebrew!!

Best form of RC approved contaception:

1. You are too busy in the daytime
2. To knackered early evenning
3. Pissed by bed time.
4. Still limp in the morning

Err hang on a moment! All the above also sound like old age!

"Night John Boy"

[Greg2013]

Why waste my time making one when i can get one delivered for less than $30 Will D ? 

Errrrr!! : I think that was my point.

HOWEVER - if any wants to have a go there's the design!

Also If Eoin (and Mrs) fancys a go then feel free to copy this.

Doh slow brain here did not twig to what you were saying