Bargain Alerts

[Jonnycheech]

I have that fridge too. I use it for fermenting, love it!

[Leann ull]

Cheap fridge for somebody in NE
http://www.adverts.ie/11867120

[Parrot]

Cam Lock Fittings: I tried for a long time to get realistic prices for Part A and Part C Cam Lock fittings in Ireland but the best couldn't beat the prices being offered by Brew Builder in Bristol, UK. I just got delivery and at the equivalent of €3.55 for Part A and €5.90 for Part C the saving was significant. I used Address Pal to get them from the UK at lowest cost - total €11.70 - but Brew Builder will post direct to Ireland at a slightly higher cost.

They also have a good price on Silicone tubing. 12mm ID X 21mm OD Platinum Cured Silicone Hose at a little over €5 per Meter.

[dcalnan]

I used keg kingdom for my part a £2.6 0 b £4.50  d £4.80 f £2.00 I got the big part c's from brewbuilder , they were both tag along items on an order and postage for both was around the €10 mark. http://www.kegkingdom.co.uk/collections/cam-lock-disconnect-fittings

[Leann ull]

Yep he has expanded his range alright, don't touch his type c's though they really restrict flow, other vendors have open bore options.

[Will_D]

The (w)hole point about bsp sizes is the Bore size.

So a 1/2" bsp screwed pipe will have a bore of 1/2" and an od of approx 20+ mm

So 1/2 camlock fittings should all allow a 1/2" test finger into the bore!

When it comes to hose tails it is a different story. A 1/2" cam lock hose tail should also have a bore of 1/2" and to allow for this (the tail will be about 22m od) you will need silicon tubing of approx 22mm id!.

HTH Will

[Sorcerers Apprentice]

The issue as I see it with hose tails is there's no point in investing in a centre inlet chugger which has a 3/4 " thread and trying to feed this through a hose tail with a 3/8 " id  bore. It's asking for cavitation problems, and can be a root cause of people not generating a whirlpool.

Sent from my SM-G900F using Tapatalk

[Parrot]

The Part Cs I got are the big bore option. The tail pipe on these has an ID of 16mm and an OD of 19mm. With the use of a little hot water the silicone hose I got from Damo, with an ID of 14mm, fitted over the tailpipe with a little encouragement from me - otherwise known as BF & I. The fit is very secure given the length of the tail pipe.

[Leann ull]

can you post a pic?

[garciaBernal]

Tempted by this offer but don't recognise any of the beers! Anyone? https://www.groupon.ie/deals/24-different-german-beers?CID=IE_AFF_5600_225_5383_1&utm_medium=afl&utm_campaign=207436&mediaId=953405&utm_source=GPN&subs_group=afl

[Parrot]

can you post a pic?

Here's the ones I got,

[LordEoin]

3 beer taps for €60
http://www.adverts.ie/other-antiques-collectables/beer-taps/11897559


2 uds taps for €40
http://www.adverts.ie/crazy-random-stuff/2-beer-taps-for-sale/11749452


vintage beer tap €15
http://www.adverts.ie/memorabilia/vintage-beer-tap/11873896

[Sorcerers Apprentice]

I picked up these Nozzle Brushes in Homestore and More in the bakery section, very handy for cleaning out taps etc
https://www.homestoreandmore.ie/baking-tools+utensils/tala-originals-nozzle-brushes/invt/063862

Sent from my SM-G900F using Tapatalk

[Dracusse]

500g frozen cherries and rasberryes for 3.50 in  polonez shops

[delzep]

I got those sour cherries in a Moldova shop for the same price